[pskmail] Re: FLDigi wandering off freq.

  • From: Rein Couperus <rein@xxxxxxxxxxxx>
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Tue, 26 May 2009 09:41:56 +0200

Fldigi is initialized when the server starts.

BTW, my problem is with a client, not with a server.

73,

Rein OH0/PA0R/P

> -----Ursprüngliche Nachricht-----
> Von: <stevez@xxxxxxxxxx>
> Gesendet: 26.05.09 09:33:04
> An: pskmail@xxxxxxxxxxxxx
> Betreff: [pskmail] Re: FLDigi wandering off freq.


> Thanks Per,
> 
> I can assure you that the server (v0.8.1) and FLDigi are communicating.
> I just watched it send a VK2ZSZ-1 beacon.
> 
> What I can tell you is that I have shut down FLDigi a few times while
> trying to make this work. All the time, the PSKMail server was left
> running. Would that cause this problem?
> 
> Thanks for your typically quick reply!
> 
> Steve.
> 
> 
> 
> On Tue, May 26th, 2009 at 5:14 PM, Per Crusefalk <per@xxxxxxxxxxxx> wrote:
> 
> > Hi Steve,
> > 
> > Just a hunch but those pskmail settings are only "active" when
> > pskmail
> > is connected to fldigi. If you launch fldigi on its own then that
> > can
> > happen, I don't have that problem when there is an active connection
> > between the two. May that be the case here?
> > 
> > 73 de Per, sm0rwo
> > 
> > 
> > tis 2009-05-26 klockan 17:10 +1000 skrev stevez@xxxxxxxxxx:
> > > Hello all,
> > > Before I start - I know this has been asked before. Please keep
> > reading ;-)
> > > 
> > > Using Fedora 10. FLDigi 3.10 (from distro) and 3.11.4 (static
> > binaries
> > > downloaded from FLDigi author's web site).
> > > 
> > > I find FLDigi keeps wandering well off RX frequency.
> > > 
> > > Yes, I have "Configure -> Modems -> Mail" set to "Use SweetSpot
> > > Frequencies".
> > > I have "Configure -> Modems -> PSK -> Mail -> Server Search Range"
> > set
> > > to 10.
> > > I have "Configure -> Modems -> PSK -> General AFC behavior ->
> > > Acquisition Search Range" set to 10.
> > > I have  CW, RTTY and PSK et al sweet spot frequencies set to
> > 1000Hz.
> > > 
> > > FLDigi has now drifted over 300Hz off freq. Depending on the kind
> > of
> > > noise I get at my QTH, this could happen in a matter of minutes,
> > and it
> > > will completely ruin its usability as a modem for 1000Hz.
> > > It also looks like it is TX-ing at the same point that it has
> > drifted
> > > to! I know that the "Lk" button will fix this TX issue, but it
> > won't
> > > stay in the "On" position after FLDigi has been restarted, no
> > matter
> > > what I try.
> > > 
> > > Help!
> > > 
> > > Steve (VK2ZSZ).
> > > 
> > > 
> > > 
> > 
> > 
> > 
> > 
> 
> 
> 
> 
> 

-- 
http://pa0r.blogspirit.com

Other related posts: