[pskmail] Re: Experiments with new modes for VHF and wide band (2700 Hz) HF.

  • From: ve7cus@xxxxxxx
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Fri, 23 Aug 2013 09:22:31 -0700

I set up a completely new computer as a server and came up with exactly the 
same result.

Darrel, VE7CUS

On 2013-08-13, at 12:12 AM, Rein Couperus <rein@xxxxxxxxxxxx> wrote:

> Must be  /usr/local/bin/fldigi  --debug-pskmail  of course...
>  
> Rein
>  
>  
> Darrel,
>  
> the last line is the only one bothering me: fldigi closed its socket...
> Did you use fldigi-3.21.72.PSKMAIL ?
> Here fldigi runs for weeks without crashing now, seems to be very stable.
> If this happens often I will have to do something about it...
>  
> I have uploaded a new version of fldigi, fldigi-3.21.72.PSKMAIL-2.tar.gz
> It provides single RSID for PSK1000, PSK63RC5, PSK63RC10 an PSK250RC3 
> (I found a few RSID numbers which were not used yet :)
>  
> When you starty it with: /usr/local/bin/ --debug-pskmail you may 
> get a clue what happens....
>  
> 73,
>  
> Rein PA0R
>  
>  
> --
>  
>  
> Rein,
> 
> When I start the server I get this message.
> 
> touch: cannot touch `zb': Permission denied
> cp: cannot stat `zb': No such file or directory
> cp: cannot stat `zb': No such file or directory
> 1
> 
> Then when I try to connect to the server I get the following in the server 
> terminal window and I cannot connect again.
> 
> CONNECT:protocol:1
> Call valid
> 5
> g85b3
> NOWMODE:PSK1000
> RXMODEM:PSK1000
> done saving rxmodem
> NEWSESSION:1
> TXMODEMNUMBER:5
> RXMODEM:PSK1000
> done saving rxmodem
> Final connect status: Asymmetric link:1 , tx mode: PSK1000 , rx mode: PSK1000
> 16:56 UTC Aug-12-2013: Added VE7CUS-1 to link list
> VE7CUS-1->VE7CUS
> 16:56 UTC Aug-12-2013: Send>APRS-IS:VE7CUS>PSKAPR,TCPIP*::PSKAPR :GATING 
> VE7CUS-1
> 
> MAXIDLE=8.78571428571429
> <SOH> 1s F279<EOT>
> 
> 16:56 UTC Aug-12-2013: > Status : last=0 good=0 end=0 missing=
> Server's rx s2n: -1 , averaged: 50
> Client's rx s2n: 100 , averaged: 66.6666666666667
> TX=PSK1000 , RX=PSK1000 , T=0 LQ=0 BL=5
> OK, Status received
> ~ABORTSEND
> READLINE:~ABORTSEND
> Cannot open visitors database
> Fldigi closed its socket...<SOH>v1s C475<EOT>
> 
> 
> Darrel, VE7CUS

Other related posts: