[pskmail] Re: Client install help

  • From: Ed <autek@xxxxxxxxxxx>
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Sun, 20 May 2007 09:27:59 -0400

Ed wrote:
I get the following error when I start ./psk_arq.pl

Can't locate Net/GPSD.pm in @INC (@INC contains: ./lib ../lib /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at arq.pm line 70.
BEGIN failed--compilation aborted at arq.pm line 70.
Compilation failed in require at ./psk_arq.pl line 43.
BEGIN failed--compilation aborted at ./psk_arq.pl line 43.

Also I'm not clear on gpsd. Do I start the daemon at boot and what do I enter when I run dpkg to configure gpsd ? I can't get it to run, I get this error

Starting GPS daemon: gpsdgpsd: can't run with neither control socket nor devices
 - failed.


Well I'll just answer my own question. After an hour or so of sifting through the mail list, I found that I didn't have this:

sudo cpan Net::GPSD

Both problems solved.


Other related posts: