There is a later version in the alpha which I will load in about an hour. Roger On 25/04/11 13:34, Pär Crusefalk wrote: > Hi, > > I think Rein was a bit faster with that alpha than I was with the > code..:-) The OK button saves and in the version you have there used to > be two ALMOST similar methods for saving. One lacked the aprs server > stuff (the save menu entry) which the other had (the OK button). > I removed the one the save menu pointed to and had it point to the one > the OK button uses. Its not good to have two methods do the same thing > (as shown here one lacked stuff). I committed that this morning and 15 > minutes later there was an alpha on the mirrors, we need to create a new > file without the extra method. > > But, you can stop using the save menu and you should be fine as is. The > save menu is really not necessary. The OK button already saves all in > the preferences window. The save menu will save things you change in the > main user window but those controls can save direct to the config file. > That means there is really no use for that save menu. > > So, if everything besides aprs server checkbox worked when using the OK > button then we should be good :-) > > 73 de Per, sm0rwo > > > > > 2011-04-25 13:00, G6CKR skrev: >> Looks like the save is clearing the beacon status string. >> If just had to click the window and press enter. >> If I had closed and restarted it might have shown a blank string in the >> window APRS window as I have seem that happen before. >> Roger >> >> >> On 25/04/11 11:44, G6CKR wrote: >>> Loaded and running. >>> Waiting on first beacon going out. >>> 2 items to report >>> It is not possible to get a tick to show in the APRS server box. >>> Also the OK save and the click save are interacting. >>> If you click rig control and OK the tick in the box is there when you >>> open edit again. >>> If you click save and then open edit the tick has gone. >>> 73 Roger >>> >>> >>> On 25/04/11 08:20, Rein Couperus wrote: >>>> Alpha image uploaded. >>>> >>>> Rein >>>> >>>>> Found it. Works here now, I'll send you a new jar right away. Will >>>>> upload a new installer asap. >>>>> >>>>> /Per >>>>> >>>>> sön 2011-04-24 klockan 21:48 +0200 skrev Pär Crusefalk: >>>>>> Hola, >>>>>> >>>>>> Yes, I see issues with save of configuration from the preferences. >>>>>> For >>>>>> instance editing server does not work now either. I will try to go >>>>>> through the entire thing tomorrow and create a better alpha. >>>>>> Will spend most of the day under my boat so I hope I can do this >>>>>> tomorrow evening. >>>>>> >>>>>> When you search for ports the system checks for working ports and >>>>>> will >>>>>> then get a hold on them and that means rts will be triggered. >>>>>> If you have hardware ptt then that will trigger a tx. System works >>>>>> that >>>>>> way so its a known behaviour. Just double click the TX switch in >>>>>> fldigi >>>>>> to stop it. If you had CAT controlling TX then it would not transmit. >>>>>> Not much we can do about this, at least when the configuration >>>>>> file is >>>>>> nicely saved and done you wont have to touch it. >>>>>> >>>>>> 73 de Per >>>>>> sm0rwo >>>>>> >>>>>> >>>>>> >>>>>> sön 2011-04-24 klockan 20:08 +0200 skrev Gunnar Bulukin: >>>>>>> Hi, >>>>>>> >>>>>>> I connected an GPS to my client, latest alpha. >>>>>>> When I, under devices, have selected port data from the GPS comes in >>>>>>> and when I save it it stops. Going back to devices again its empty. >>>>>>> When I try too search for ports the tx on the rig goes on and I have >>>>>>> to stop pskmail and fldigi to disable the tx. >>>>>>> Probably I am doing something wrong, again!! >>>>>>> >>>>>>> 73 de SA6BQZ Gunnar >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>> >>> >>> >> >> > >