Thanks Rein, I've tried the changes but it only works when I choose $scanner = "S" .If I choose $scanner = "O" or $scanner = "S" then PTT got and stayed triggered every minute . The only possibility to get PTT released then is to push T/R button in fldigi. Is the $Defaultmode in pskmailrc.pl, like described in the PSKmail server 1.0.34 manual, an obsolete entry then ?
I found the following description for the $scanner variable: "S" = Single frequency "F" = frequency scanning, config in $HOME/.pskmail/qrg/freqs.txt "M" = memory scan, config in $HOME/.pskmail/qrg/memtable "C" = set memory channel data What does the "O" parameter mean ? 73 Juergen DL8JF On 11/05/2014 11:13 PM, Rein Couperus wrote:
Juergen, the default mode is normally set in the ~/.pskmail/qrg/freqs.txt file. You can set 5 different modes, which are repeated every 5 minutes. So when you set all 5 modes to DOMINOEX22 you will be o.k. In case you don't use frequency scanning, set $scanner = "O"; instead of $scanner = "F"; Fldigi will switch modes then. The freqs.txt file then looks like e.g: 10148000,10148000,10148000,10148000,10148000,#22 10148000,10148000,10148000,10148000,10148000,#23 DOMINOEX22,DOMINOEX22,DOMINOEX22,DOMINOEX22,DOMINOEX22, Hope this helps, Rein PA0R Hi, I've changed $Defaultmode in pskmailrc.pl from PSK500R to DOMINOEX22 but after a restart of the pskmail server the Defaultmode is still PSK500R. If I change it manually to DOMINOEX22 within fldigi, the pskmail server switch it back to PSK500R after some time. Any ideas ? 73 Juergen DL8JF