OK... in 2.0.9 the Busy indicator (the indicator to the right of the waterfall) is
triggered by the sum of the last line of the waterfall, between the red lines.
The waterfall should be mainly black/blue, see attached picture...
The DCD indicator controls the TX lock. For experimentation, set
Preferences->Edit->Configuration->DCD to 0.
Rein
Il 15/04/2012 17:50, Rein Couperus ha scritto:
>
> and have you set the levels in alsamixer? (especially the microphone amp...)
> I always set alsamixer so the sliders on the DSP tab can be mid-range...
The problem is on level in input for Busy indicator go off.
I can obtain it using alsamixer, Att (10 dB) or jpskmail slider (4) but,
with this values, I can't get input from any server.
If I go up in sound level, as remove Att (0 dB) or put jpskmail slider
to 6, I get input signal but Busy indicator is red.
Is Busy indicator modified also by Sql?
Regards
Franco Spinelli
P.S. I am using same hardware and same levels as in Fldigi
