Hi Franco, Hi Gunnar I have also an EEEPc 1000 (must be a good pc hi hi) I have problems with Hardware PTT. Incomming Signal is ok. But I can not switch to connect. So I did not know if outgoining signal is ok. I have a Alinco DX 70 on the boat. It has no VOX or CAT interface. 73 Joerg DL9YCS 2012/4/15 Gunnar Bulukin <gunnar@xxxxxxxxxx> > Hi Franco, > > I have had the same problem with Asus Eeeps 1000. When I used a SignaLink > all these problems disappeared. > It seems as if the Asus has some problems with internal sounds from the > unit > itself. > > 73 de Gunnar > > -----Original Message----- > From: pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] > On > Behalf Of Franco Spinelli > Sent: Sunday, April 15, 2012 1:30 PM > To: pskmail@xxxxxxxxxxxxx > Subject: [pskmail] Re: Aw: Jpskmail 2.0.9 > > 2012/4/14 Rein Couperus <rein@xxxxxxxxxxxx>: > > I use my FT897 with VOX, it works perfectly... the FT897 even has a > > VOX sensitivity control for the DATA port... > > > > I have forced /dev/ttyUSB0 as rig port in main() and done some test. > > First big problem is with audio level. > Busy indicator is constantly red and Sql cursor work on reception bun don't > work on Busy indicator. > > Obviously no TX with red Busy indicator. > For getting it off I need a input sound level so low than I can't receive > any server! > > My test are on an Asus Eeepc 1000 with java SUN 1.6.0.26 > > Regards > Franco Spinelli > IW2DHW > > >