You don’t. Support is native, and it just works from my experience. From: programmingblind-bounce@xxxxxxxxxxxxx [mailto:programmingblind-bounce@xxxxxxxxxxxxx] On Behalf Of Michael Taboada Sent: Saturday, September 10, 2011 1:29 PM To: programmingblind@xxxxxxxxxxxxx Subject: Re: visual studio 2010 help I basically need to know how the ide works, and what commands to use to get it to do all the features usually needed while developing a c++ or other application. I am using Jaws 12.0 (the latest) and visual studio 2010 pro. Hth, -Michael. From: Eunice Klicker<mailto:emklicker@xxxxxxxxx> Sent: Saturday, September 10, 2011 12:21 AM To: programmingblind@xxxxxxxxxxxxx<mailto:programmingblind@xxxxxxxxxxxxx> Subject: Re: visual studio 2010 help What kinds of things do you need to know about using the two together? And, what version of Jaws are you running? I am using VS2010 and JFW12, and I have only a couple of problems. From: Michael Taboada<mailto:ai5hf@xxxxxxxxxxx> Sent: Friday, September 09, 2011 10:00 PM To: programmingblind@xxxxxxxxxxxxx<mailto:programmingblind@xxxxxxxxxxxxx> Subject: visual studio 2010 help Hi, I have the professional version of visual studio 2010. This should theoretically mean it works at least ok with jfw. However, I can’t seem to find any documentation on how to use visual studio 2010 with jaws. I was going to attend the webinar on this topic, but unfortunately it got canceled. I also tried looking in the jfw help, but the only visual studio listed there is visual studio .net, which doesn’t seem to be the right one. Any help on finding resources for this is appreciated. Thanks, -Michael. P.S. It may be similar to 2008 or 2005 visual studio, but I’ve never used those.