If you have an hp scanner/printer, and it has 1 touch buttons on it, these applications usually are in charge of monitoring for those button presses. However to be safe I would still perform a check, specially if you don't have an hp product drivers installed... HTH, D!J!X! -----Original Message----- From: programmingblind-bounce@xxxxxxxxxxxxx [mailto:programmingblind-bounce@xxxxxxxxxxxxx] On Behalf Of tribble Sent: Monday, November 03, 2008 4:28 PM To: bprogramming; blind-windows@xxxxxxxxxxxxx; NFBnet NFBCS Mailing List Subject: odd error I got the following error coming out of standby: hpqtra08.exe - Application Error The instruction at "0x7c911760" referenced memory at "0x00000000". The memory could not be "read".graphic 747 Click on OK to terminate the program Click on CANCEL to debug the program OK Cancel I virtualized the screen to copy and ask if someone knew what this application was -- but when I clicked ok, I was taken to a screen that said hp display (or was that digital?) imaging monitor had encountered a fatal error and had to close -- the usual request to send error report to Microsoft... Nothing seems to be different -- jaws is still working and the stuff on screen is the same. Should I be worried about this program? i.e., is it essential for something? or alternatively, is it malware? TIA --le __________ View the list's information and change your settings at //www.freelists.org/list/programmingblind __________ View the list's information and change your settings at //www.freelists.org/list/programmingblind