That's assuming one has a pair of eyeballs around which are able enough to
see colors.
-----Original Message-----
From: programmingblind-bounce@xxxxxxxxxxxxx
[mailto:programmingblind-bounce@xxxxxxxxxxxxx] On Behalf Of Bryan Schulz
Sent: 18 November 2010 00:46
To: programmingblind@xxxxxxxxxxxxx
Subject: Re: making network cables
i picked up a phone/rj45/coax cable tester a few years ago at the national
convention nfb market for about $20 but that still doesn't avoid wasting
wire when you are too stubborn to ask somebody.
Bryan Schulz
----- Original Message -----
From: "Littlefield, Tyler" <tyler@xxxxxxxxxxxxx>
To: <programmingblind@xxxxxxxxxxxxx>
Sent: Wednesday, November 17, 2010 6:28 PM
Subject: Re: making network cables
You could probably make one of those by hand. use two clips, and attach a
beeper. You can send a current through and when the circuit is complete,
the beeper will go off. Now that doesn't solve your problem of matching
up
on the terminals, but it does help.
On 11/17/2010 4:47 PM, Trouble wrote:
As long as you trim off enough wire coating to let the wire fit the
terminal end. making the crimp is no problem.
Also as long as you have the wire for each hole the same on each end. If
not for a paid job site, who cares the color.
They do make tools that beep when each end is the same.
had to make network setups in college and it was a blast. The instructor
let me help the sighted ones in class, because they messed up to much.
At 06:13 PM 11/17/2010, you wrote:
Hello Haden:
I have made a few network cables with sighted help. There is no
independent way to figure out the wire colors. Some of the wires have a
white stripe, so the blue wire is different from the blue-white wire.
Once you get the wires in order and trimmed, it is possible to slip on
the plug and crimp it, but a sighted person should look through the
plug
to check.
Regards,
Robert
----- Original Message ----- From: "Haden Pike" <haden.pike@xxxxxxxxx>
To: <programmingblind@xxxxxxxxxxxxx>
Sent: Wednesday, November 17, 2010 2:18 PM
Subject: making network cables
Hi all. We are making network cables in a class I am taking. To be
specific, they are straight through cables. Can anyone provide any
info
on how I can do this particularly identifying what color each of the
wires are. Is there a factor that will identify it?
Thanks for any help.
Haden
__________
View the list's information and change your settings at
//www.freelists.org/list/programmingblind
__________
View the list's information and change your settings at
//www.freelists.org/list/programmingblind
Tim
trouble
Verizon FIOS support tech
"Never offend people with style when you can offend them with
substance."
--Sam Brown
Blindeudora list owner.
To subscribe or info: //www.freelists.org/webpage/blindeudora
__________
View the list's information and change your settings at
//www.freelists.org/list/programmingblind
--
Thanks,
Ty
__________
View the list's information and change your settings at
//www.freelists.org/list/programmingblind
__________
View the list's information and change your settings at
//www.freelists.org/list/programmingblind
__________
View the list's information and change your settings at
//www.freelists.org/list/programmingblind
