Re: Is there a program that will help you create Sapi5 voices?

  • From: "John Greer" <jpgreer17@xxxxxxxxxxx>
  • To: <programmingblind@xxxxxxxxxxxxx>
  • Date: Sat, 6 Oct 2007 06:46:24 -0500

Well when you start the recorder software, not model talker, you switch jaws to 
the jaws cursor.  Then make sure the jaws cursor is in unrestricted mode by 
pressing insert r until you hear jaws say unrestricted.  Next press page up and 
arrow down until you here jaws say something like record, playback, next etc.  
Then you just press control plus left, right, up or down to line the jaws 
cursor up on the button you want.  When you find the button you want, most 
likely record, press it using num pad slash.  When you want to stop recording 
the stop button should be somewhere on the same line as the record button so 
just control left or right arrow until you here jaws say stop and press the num 
pad slash key.  I did not give any instructions on how to do this using a 
laptop because they don't recommend using the software with a laptop.  Also it 
will make things a bit easier if you maximize the window before you do any of 
the steps above.  This can be done by pressing alt space bar, then pressing the 
letter x.
  ----- Original Message ----- 
  From: alex 
  To: programmingblind@xxxxxxxxxxxxx 
  Sent: Saturday, October 06, 2007 6:08 AM
  Subject: Re: Is there a program that will help you create Sapi5 voices?


  How should i get the curser to the record button? The jaws curser only reads 
from what i thought.
    ----- Original Message ----- 
    From: John Greer 
    To: programmingblind@xxxxxxxxxxxxx 
    Sent: Friday, October 05, 2007 11:38 PM
    Subject: Re: Is there a program that will help you create Sapi5 voices?


    There are some but they are not documented for the model talker player.  
However to use the recording part of it you will have to use the jaws cursor.
      ----- Original Message ----- 
      From: alex 
      To: programmingblind@freelistsorg 
      Sent: Friday, October 05, 2007 10:16 PM
      Subject: Re: Is there a program that will help you create Sapi5 voices?


      For a blind person, is there Jaws scripts for model talker?
      Because I understand it now but just nead some scripts or shortcut keys.
        ----- Original Message ----- 
        From: John Greer 
        To: programmingblind@freelistsorg 
        Sent: Friday, October 05, 2007 8:37 PM
        Subject: Re: Is there a program that will help you create Sapi5 voices?


        Other than model talker I don't know of any.  However I may be able to 
point you to a person that can help.  He is the developer of the E Speak text 
to speech voice that is used with the NVDA screen reader.  The address to his 
site is http://espeak.sourceforge.net/

          ----- Original Message ----- 
          From: alex 
          To: programmingblind@freelistsorg 
          Sent: Friday, October 05, 2007 5:09 PM
          Subject: Is there a program that will help you create Sapi5 voices?


          Well I was wondering, 
          Is there a program that will help you create Sapi5 voices?

          Like something that you speak a number of letters into a microphone 
then it gets an understanding of your voice and creates a sapi5 engine out of 
it?

Other related posts: