The following new message has been posted on Phorm Support Forum at <http://www.phorm.com/support/>. *************************************************************************** MESSAGE: (#2559) Re: things inside curly braces don't print <http://www.phorm.com/support/?rev=2559> AUTHOR: Patrick O'Hara DATE: April 20, 2003 at 6:08 a.m. EST Reply To: (#2558) things inside curly braces don't print Author: jeromeo Date: April 20, 2003 at 5:59 a.m. EST Hi there, Just off the top of my head I can't think why it wou;dn't be working - I had problems with the demos when I first started, so what I suggest is that you build your own form, and just get it working with the real simple stuff. Don't worry about validation, just get the information from the form to pass through Phorm onto an ack page. You will need to set PHP_INFONLY = true while you are not doing anything with the data. Hope this helps, Patrick O'Hara WhitsundayIT QLD, Australia patrick@xxxxxxxxxxxxxxxx www.whitsundayit.com *************************************************************************** This is an automatically-generated notice. If you'd like to be removed from the mailing list, please visit Phorm Support Forum at <http://www.phorm.com/support/>, or send your request to webbbs@xxxxxxxxxx If you wish to respond to this message, please post your response directly to the board. Thank you! ------------------------------------------------- You are receiving this message because you are subscribed to the Phorm mailing list. To send messages to the mailing list, simply send email to phorm@xxxxxxxxxxxxx from the address you have subscribed. You may unsubscribe from the list by sending email to phorm-request@xxxxxxxxxxxxx with 'unsubscribe' in the SUBJECT field.