The following new message has been posted on Phorm Support Forum at <http://www.phorm.com/support/>. *************************************************************************** MESSAGE: (#1975) Re: Validation doesn't work <http://www.phorm.com/support/?rev=1975> AUTHOR: GuanoLad DATE: December 19, 2002 at 6:43 p.m. EST Reply To: (#1867) Re: Validation doesn't work Author: Holotech Date: November 6, 2002 at 9:07 a.m. EST > I'm sorry, it's not clear. I see you're missing the > file number in your rules below, but you're saying > that when you include that, all the rules fail? Fail > in what way - they all generate a validation error, no > matter what's in the field? Double check and be sure > you have tabs and spaces in the right places in the > rule definitions. The · and » symbols in > the documentation indicate where they go. After some experimentation, I think I found where things went wrong - I had an underscore in the field name. Apparently that was messing things up. Every field that did not have an underscore seems to validate just fine, now. Sorry about that. *************************************************************************** This is an automatically-generated notice. If you'd like to be removed from the mailing list, please visit Phorm Support Forum at <http://www.phorm.com/support/>, or send your request to webbbs@xxxxxxxxxx If you wish to respond to this message, please post your response directly to the board. Thank you! ------------------------------------------------- You are receiving this message because you are subscribed to the Phorm mailing list. To send messages to the mailing list, simply send email to phorm@xxxxxxxxxxxxx from the address you have subscribed. You may unsubscribe from the list by sending email to phorm-request@xxxxxxxxxxxxx with 'unsubscribe' in the SUBJECT field.