The following new message has been posted on Phorm Support Forum at <http://www.phorm.com/support/>. *************************************************************************** MESSAGE: (#3829) Re: Database Host <http://www.phorm.com/support/?rev=3829> AUTHOR: Holotech DATE: March 9, 2004 at 7:01 a.m. EST Reply To: (#3827) Re: Database Host Author: Rich Date: March 8, 2004 at 11:23 p.m. EST > I remember a while back that you recommended Pair > Networks as a host, but I just found out from them, > that their dbase host would be *$DBase = > "db#.pair.com";* > Can this work with phorm? Again, the only reason I ask > is because I had trouble once before, on another > server, when the host was something other than > *localhost*. $DBase should be set to whatever the address of your database server is. You're correct about the Pair Networks database addresses; that's what I use. *************************************************************************** This is an automatically-generated notice. If you'd like to be removed from the mailing list, please visit Phorm Support Forum at <http://www.phorm.com/support/>, or send your request to webbbs@xxxxxxxxxx If you wish to respond to this message, please post your response directly to the board. Thank you! ------------------------------------------------- You are receiving this message because you are subscribed to the Phorm mailing list. To send messages to the mailing list, simply send email to phorm@xxxxxxxxxxxxx from the address you have subscribed. You may unsubscribe from the list by sending email to phorm-request@xxxxxxxxxxxxx with 'unsubscribe' in the SUBJECT field.