Network Magic? Rose ----- Original Message ----- From: "Don Wilcox" <Dwilcox3@xxxxxxxxxx> To: <pctechtalk@xxxxxxxxxxxxx> Sent: Tuesday, June 12, 2007 4:37 PM Subject: -=PCTechTalk=- Re: wireless connection - not staying connected If you have a linksys router you should have the Linksys utility to replace the MS utility. I had both router and adapter and I used the Linksys the utility. I'm wired with that computer now and don't remember the name but it puts a little green square in your notification area. Don ----- Original Message ----- From: "Cris" <cris@xxxxxxxxxxxxxxxx> To: <pctechtalk@xxxxxxxxxxxxx> Sent: Tuesday, June 12, 2007 7:05 PM Subject: -=PCTechTalk=- Re: wireless connection - not staying connected > Thank you!! > very interesting! > I have sp2. So - ok - I clicked on the msoft link - it does mention sp2. > Talked to my son and he said he disabled ssid and it wouldn't connect. > He also said that I don't have another control utility. > I am just really frustrated at this point! Not frustrated enough to > disable the password protection though - YET!! LOL > > Cris > > > ----- Original Message ----- > From: Bran x86 > To: pctechtalk@xxxxxxxxxxxxx > Sent: Tuesday, June 12, 2007 5:49 PM > Subject: -=PCTechTalk=- Re: wireless connection - not staying connected > > > if you use the Microsoft Windows XP SP 1-based Wireless Zero Configuration > service to manage your wireless (aka, the "built-in client"), you're > probably running into a horrible bug that Microsoft > calls<http://support.microsoft.com/default.aspx?scid=kb;en-us;811427&Product=winxp>"behavior > by design." The gist of this is as follows: if your wireless > network is set to *not* broadcast your SSID, Microsoft's wireless manager > will periodically drop your non-broadcasting WiFi connection in response > to > the presence of a *broadcasting* SSID-based network. You won't fully > associate with that network, but the service will pop-up and tell you that > there are multiple wireless networks to join, even if you have removed all > other networks from your preferred settings (this contradicts Microsoft's > report, which says it *only* affects preferred networks). The upshot of > this > is that you, the user who changes his default SSID and then sets it to not > broadcast<http://www.arstechnica.com/paedia/w/wireless-security-howto/home-802.11b-1.html>(as > most security guides, and most hardware setup guides will tell you to > do), now gets dropped off your network when you neighbor shows up with his > new D-Link wireless router and not only fails to change the SSID from > default to something else, but does not turn off broadcasting, either. > While > many may debate the security benefits of disabling SSID broadcast, it is a > practice that is recommended by most manufacturers of wireless products. > Your options are two (2.5, really): you can set your own router to > broadcast > your SSID, which it resolved the problem. Alternatively, you can stop > using > the Windows Wireless Zero Configuration service and instead opt for > another > wireless client, namely that which came with your wireless card. > Additional > testing revealed that if your wireless settings are already configured and > correct, you can actually stop and then disable the Wireless Zero > Configuration service. The wireless still works, but your Wireless tab > will > disappear in Networking properties. This solution is not ideal, but it > could > be used in a bind. > > > On 6/12/07, Cris <cris@xxxxxxxxxxxxxxxx> wrote: >> >> win xp >> linksy's wireless g >> -- Please remember to trim your replies (including this sentence and everything below it) and adjust the subject line as necessary. To unsubscribe or change your email settings: //www.freelists.org/webpage/pctechtalk To access our Archives: http://groups.yahoo.com/group/PCTechTalk/messages/ //www.freelists.org/archives/pctechtalk/