-=PCTechTalk=- IDE2 & IDE3 Connectors on new build
- From: "Cajun" <cajun@xxxxxxxxx>
- To: "PCTechTalk" <pctechtalk@xxxxxxxxxxxxx>
- Date: Tue, 19 Apr 2005 07:50:05 -0500
I just built my first "new build" computer. I have a Gigabyte GA-81915P Duo
Pro Rev. 1.3 LGA 775 Socket T motherboard with SATA, RAID, 3 IDE connectors,
and Award BIOS.
I am running one CDRW and one Zip drive on one IDE cable, and one IDE hard
drive on a second IDE cable. I am not running RAID or any SATA peripherals at
this time. My problem is that both the CDRW/Zip drives and the IDE Hard Drive
work on IDE1, but neither work on IDE2 or IDE3. The manual says the CDRW/Zip
has to be on IDE1 to work properly.
In the BIOS under Integrated Peripherals I have SATA Raid/AHCI Mode disabled
and On-Chip SATA Mode set to Auto. This page shows On Chip Primary PCI IDE
enabled at the top. I thought maybe the SATA mode had something to do with it,
so I tried it on every setting, but it's still not recognizing my hard drive on
IDE2. How do I get IDE2 and IDE3 to work? Do I need to change a BIOS setting?
Thanks.
)
(
[_]? dj
--
<Please delete this line and everything below.>
To unsub or change your email settings:
//www.freelists.org/webpage/pctechtalk
To access our Archives:
http://groups.yahoo.com/group/PCTechTalk/messages/
//www.freelists.org/archives/pctechtalk/
Other related posts:
