OK, in the left of that window, run the setup office or small network in network tasks. That is the wizard. Bob Noble www.sonic.net/bnoble ----- Original Message ----- From: "Pam" <ltf01@xxxxxxxxxx> To: <pcductape@xxxxxxxxxxxxx> Sent: Saturday, February 08, 2003 8:25 PM Subject: [pcductape] now network 98 client to 2k | Mine isn't like that. I see Start/Connect To, and then Show all | Connections. When I click on it it simply shows me an explorer type screen | with my 2 dial ups, and the existing LAN. No wizards. | | Pam | | | > | > | >Hi Pam, | >I have a sneaky way out for the 98 machine. :O) | > | >Run the network connection wizard in show all networks under | >start, connect to, | >show all networks in the xp machine. You'll find this in the left | >of the window. | >Make the diskette during the wizard session and run it in the 98 | >machine and | >see if it works. Make sure you answer all the questions right in | >the wizard on | >the xp machine. | > | >The ppp protocol is usually used to log onto the internet, so | >don't know if it | >is needed in the 98 machine to connect since it connects through | >the 2k machine. | > | >Bob Noble | > | | To unsubscribe from this list send an email to | pcductape-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field | OR by logging into the Web interface. | To unsubscribe from this list send an email to pcductape-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the Web interface.