[pasmembers] Re: Revolution Imager R2

  • From: "William Powell" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "wrpowell2002" for DMARC)
  • To: pasmembers@xxxxxxxxxxxxx
  • Date: Thu, 18 May 2017 18:50:22 -0700

Very nice Sam. I am going to check it out too.
Thanks for sharing.
Bill

On May 18, 2017, at 18:08, insanas (Redacted sender "insanas" for DMARC) 
<dmarc-noreply@xxxxxxxxxxxxx> wrote:

At the last several BMC PVCC star parties I have seen Ray Adams, Howard 
Moneta and Mike Cawley dazzling us with this new imaging device. It is only 
$300 so I bought one and used it for the first time yesterday morning at 
12:30 am from my backyard which is bortle 6.6
This is M13 globular cluster shot through my 8 inch newtonian reflector 
tracking on a German equatorial mount for under 30 seconds. I still need to 
learn how to better adjust the brightness, contrast, gain, exposure time, 
stacking, and many other parameters. However, this image was taken after 
studying the manual for about an hour and then learning some of the many 
controls for about an hour, focusing on a star for a few minutes, and then 
taking several images over about another half hour. Not quite up to Chris 
Johnson's or Chet Schuler's astrophotography, but not bad for wanting an 
inexpensive way of preserving memories. Also, for public outreach programs 
with little kids unable to look through eyepieces, or for large crowds with 
little time to have everyone look through the eyepiece, this can come in 
handy. I still love looking though the eyepiece best of all. But when you are 
trying to see a deep space object in not so dark skies, this can help alot. 
Sam Insana President of PAS




Sent from my Verizon 4G LTE smartphone
<20170517_004303_1495154475926.jpg>

Other related posts: