[overture] Re: Hyberbolic grid generation without Ogen
- From: Joel Guerrero <joegi.geo@xxxxxxxxx>
- To: overture@xxxxxxxxxxxxx
- Date: Fri, 9 May 2008 08:43:27 -0700 (PDT)
Hi,
How do I have to modify airfoil.C in order to add elliptic smoothing???
Regards,
jg
----- Original Message ----
From: Bill Henshaw <henshaw@xxxxxxxx>
To: freelists <overture@xxxxxxxxxxxxx>
Sent: Wednesday, January 30, 2008 5:21:32 AM
Subject: [overture] Re: Hyberbolic grid generation without Ogen
Hi Dominic,
The attached file contains the main program airfoil.C that
shows how to generate the naca airfoil grid with the hyperbolic
grid generator. I have also attached some new versions of Overture
files that you should use, replacing the ones you have.
regards,
Bill.
#DOMINIC DENVER JOHN CHANDAR# wrote:
> Hi,
>
> I'm trying to write up a small code to generate a a grid around an
> airfoil without ogen using the HyperbolicMapping class. I followed the
> naca.hype.cmd ogen command file and i still think that i have missed
> some information in the code since i always end up in getting a negative
> volume error (Some problem in the T.E). But the naca.hype.cmd works very
> well using ogen...(I've used similar parameters for both the cmd file
> and the source code). The code is as follows. Any ways to rectify this
> error ?... Many thanks....Dominic
>
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
Other related posts:
