Tom,
Larry is right about the firmware update. It is kind of tricky. You had
to update both the receivers and the internal transmitter module as well.
But I don't think that it applies to the multi-protocol module. That is
why I was suggesting the Lemon Spektrum module for your planes.
If you want some help, I could share what knowledge I have on the subject.
Jerry
On Thu, Jul 15, 2021 at 2:45 PM Larry Carbaugh <larryn7luf@xxxxxxxxx> wrote:
Tom, one thing I have learned is to make sure all the firmware be the
same, and I did upgrade mine, and have some tools to do the upgrades, but I
would have to go back to see how I did it.
I have learned a lot from this guy. https://youtu.be/0fNC2Jw1kxY
Here are some other links,
https://www.youtube.com/results?search_query=frsky+receiver+firmware+update
Larry
On Thu, Jul 15, 2021 at 2:15 PM Tom Speer <me@xxxxxxxxxx> wrote:
Same here an X9D+ that I don't use. I have the multi-protocol module
installed, but I've never been able to get it to bind with a Spectrum
receiver. If anyone is using FrSky & OpenTx, I'd like to get together with
them and learn how to get my transmitter working with my planes.
I have found it makes a good controller for simulation on my laptop,
because it supports a USB cable. I have the RF dongle, too, but I prefer
to use the USB cable.
I bought the X9D+ because FrSky records the transmitter stick inputs in
its telemetry stream as well as the sensors on the plane. Until recently
Spektrum telemetry only recorded the airplane measurands. That meant one
could know what the plane did, but one had no idea why it did what it did!
The new NX transmitters from Spektrum record transmitter variables, too.
Something to think about if you are considering a transmitter upgrade.
Cheers,
Tom
On 7/14/21 4:19 PM, Larry Carbaugh wrote:
I have one, but it never been used.
On Wed, Jul 14, 2021 at 3:43 PM ORCA <ORCA@xxxxxxxxxxxxx> wrote:
Anybody use the FrSky transmitter? If so, let me know
Rick
