I used a 1/16 inch rod, with a short piece of the inside plastic shaft from a
"Sullivan golden rod" as the tubular bearing. From building models over the
years I still have
two 4 foot golden rods in my Parts inventory that are available! Hopefully the
attached photo shows the details better than the other picts. Lee
On April 2, 2020, at 8:44 AM, Jake Boyd <dyob42@xxxxxxxxx> wrote:
Rick and Lee, any design instructions for the steerable tail wheel on the
STANG?
Jake
Sent from EKAJDYOB
On Apr 2, 2020, at 07:58, John Castleman <hobbynut@xxxxxxxxxxx> wrote:
Good Job Lee, you are the second person to suggest that ! I have never had
that problem, however, I usually get off the ground quickly.
On April 1, 2020 at 8:11 PM Lee lannoye < lanwoi@xxxxxxxxxxx> wrote:
After doing ground loops every 10 feet during "taxi" tests i added a tailwheel
that cured the problem. Now waiting to see if it flys! Lee
Attachment:
IMG_20200402_162448_hdr.jpg
Description: JPEG image