Brian,
Did you start an xserver on your PC (we use xming)? Once you've done that,
you need to set the DISPLAY environment variable to your PCs IP address:0.0
(ex: export DISPLAY=100.100.100.1:0.0). Then it should work, provided you
don't have firewall issues.
Scott Canaan '88 (srcdco@xxxxxxx<mailto:srcdco@xxxxxxx>)
(585) 475-7886 - work (585) 339-8659 - cell
"Life is like a sewer, what you get out of it depends on what you put into it."
- Tom Lehrer
From: oracle-l-bounce@xxxxxxxxxxxxx [mailto:oracle-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Zelli, Brian
Sent: Thursday, July 16, 2015 11:14 AM
To: oracle-l (oracle-l@xxxxxxxxxxxxx)
Subject: xterm
Ok, running HPUX on the server. I launch Reflections from my pc and log onto
the server. I want to run the oracle installer for 11g. I know I have to get
an xterm going. I've done this a few times before on these servers but have
gone brain dead. I've googled the crap out of this and can't seem to find
anything that works. I've tried setting the DISPLAY to the ip of the server,
setting the DISPLAY to my pc's IP, xhost, xterm commands and usually come up
with "Can't open display: " Anybody familiar with this setup?
Brian
This email message may contain legally privileged and/or confidential
information. If you are not the intended recipient(s), or the employee or agent
responsible for the delivery of this message to the intended recipient(s), you
are hereby notified that any disclosure, copying, distribution, or use of this
email message is prohibited. If you have received this message in error, please
notify the sender immediately by e-mail and delete this email message from your
computer. Thank you.
