This is what is in the alert log
Starting control autobackup
Hex dump of (file 0, block 10014) in trace file
c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_4812.trc
Corrupt block relative dba: 0x0000271e (file 0, block 10014)
Fractured block found during backing up controlfile
Data in bad block:
type: 0 format: 2 rdba: 0x0000271e
last change scn: 0x0000.00000000 seq: 0x1 flg: 0x05
spare1: 0x0 spare2: 0x0 spare3: 0x0
consistency value in tail: 0x00000000
check value in block header: 0xe01e
computed block checksum: 0x1
Reread of blocknum=10014,
file=C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA.
found same corrupt data
Reread of blocknum=10014,
file=C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA.
found same corrupt data
Reread of blocknum=10014,
file=C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA.
found same corrupt data
Reread of blocknum=10014,
file=C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA.
found same corrupt data
Reread of blocknum=10014,
file=C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA.
found same corrupt data
Deleted Oracle managed file
D:\BACKUP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2018_08_23\O1_MF_S_984899284_FQXHY6B8_.BKP
Autobackup failed with following error
ORA-19624: operation failed, retry possible
ORA-19599: block number 10014 is corrupt in control file
C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA
Thu Aug 23 07:08:57 2018
Hex dump of (file 0, block 10014) in trace file
c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_4812.trc
Corrupt block relative dba: 0x0000271e (file 0, block 10014)
Fractured block found during backing up controlfile
Data in bad block:
type: 0 format: 2 rdba: 0x0000271e
last change scn: 0x0000.00000000 seq: 0x1 flg: 0x05
spare1: 0x0 spare2: 0x0 spare3: 0x0
consistency value in tail: 0x00000000
check value in block header: 0xe01e
computed block checksum: 0x1
Reread of blocknum=10014,
file=C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA.
found same corrupt data
Reread of blocknum=10014,
file=C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA.
found same corrupt data
Reread of blocknum=10014,
file=C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA.
found same corrupt data
Reread of blocknum=10014,
file=C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA.
found same corrupt data
Reread of blocknum=10014,
file=C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA.
found same corrupt data
On Thu, Aug 23, 2018 at 7:10 AM Jeff Chirco <backseatdba@xxxxxxxxx> wrote:
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> show parameter control
NAME TYPE VALUE
------------------------------------ -----------
------------------------------
control_file_record_keep_time integer 7
control_files string
D:\DATA\ORACLE\ORADATA\XE\CONTROL01.DBF,
D:\DATA\ORACLE\ORADATA\XE\CONTROL02.DBF, D:\DATA\
ORACLE\ORADATA\XE\CONTROL03.DBF
SQL> exit
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 -
Produ
ction
C:\Documents and Settings\store291\Desktop>rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Thu Aug 23 07:07:14
2018
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: XE (DBID=2593989116)
RMAN> backup datafile 4 format
'C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DAT
ABASE\df4_%U.bk';
Starting backup at 23-AUG-18
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=193 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00004 name=D:\DATA\ORACLE\ORADATA\XE\USERS.DBF
channel ORA_DISK_1: starting piece 1 at 23-AUG-18
channel ORA_DISK_1: finished piece 1 at 23-AUG-18
piece
handle=C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\DF4_PCTB8NM4_
1_1.BK tag=TAG20180823T070747 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:15
Finished backup at 23-AUG-18
Starting Control File and SPFILE Autobackup at 23-AUG-18
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of Control File and SPFILE Autobackup command on
ORA_DISK_1
channel at 08/23/2018 07:08:11
ORA-19599: block number 10014 is corrupt in control file
C:\ORACLEXE\APP\ORACLE\
PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA
RMAN>
RMAN> backup current controlfile format
'C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\S
ERVER\DATABASE\ctl_%U.bk';
Starting backup at 23-AUG-18
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current control file in backupset
channel ORA_DISK_1: starting piece 1 at 23-AUG-18
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/23/2018
07:08:
58
ORA-19599: block number 10014 is corrupt in control file
C:\ORACLEXE\APP\ORACLE\
PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA
RMAN>
On Wed, Aug 22, 2018 at 5:02 PM LK <lkaing@xxxxxxxxx> wrote:
Hi Jeff,
Please show me this:
1) In SQL*Plus as DBA:
SQL> show parameter control
2) run some more RMAN backup tests to the 2 locations, choosing a small
sized datafile, eg. datafile 4,
RMAN> backup datafile 4 format
'C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\df4_%U.bk';
RMAN> backup current controlfile format
'C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\ctl_%U.bk';
Cheers,
Leng.
On Wed, Aug 22, 2018 at 1:57 AM, Gus Spier <gus.spier@xxxxxxxxx> wrote:
I apologize if this has been mentioned before and I missed it.
You are certain that the physical disk you are trying to write to is
entirely serviceable? It is not possible that the disk that houses block
10014 is failing, right?
v/r,
Gus
On Tue, Aug 21, 2018 at 10:56 AM Jeff Chirco <backseatdba@xxxxxxxxx>
wrote:
Thanks for your help. It would be weird if it was permissions as this
has worked for years.
RMAN> show all;
using target database control file instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; #
default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; #
default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO
'C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SE
RVER\DATABASE\SNCFXE2.ORA';
RMAN> backup datafile 1;
Starting backup at 21-AUG-18
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=195 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=D:\DATA\ORACLE\ORADATA\XE\SYSTEM.DBF
channel ORA_DISK_1: starting piece 1 at 21-AUG-18
channel ORA_DISK_1: finished piece 1 at 21-AUG-18
piece
handle=D:\BACKUP\ORACLE\FLASH_RECOVERY_AREA\XE\BACKUPSET\2018_08_21\O1_MF_
NNNDF_TAG20180821T074350_FQR996K2_.BKP tag=TAG20180821T074350
comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:15
Finished backup at 21-AUG-18
Starting Control File and SPFILE Autobackup at 21-AUG-18
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of Control File and SPFILE Autobackup command on
ORA_DISK_1
channel at 08/21/2018 07:44:13
ORA-19599: block number 10014 is corrupt in control file
C:\ORACLEXE\APP\ORACLE\
PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA
RMAN> show parameter control
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "parameter": expecting one of: "all,
archivelog,
auxiliary, auxname, backup, channel, controlfile, datafile, device,
default, ex
clude, encryption, maxsetsize, retention, snapshot"
RMAN-01007: at line 1 column 6 file: standard input
On Tue, Aug 21, 2018 at 3:59 AM LK <lkaing@xxxxxxxxx> wrote:
Hi Jeff,
From the debug we can see the failure is here:
DBGRPC: krmxrpc: xc=15378960 kpurpc2 rc=19624 db=target
proc=DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
DBGMISC: ENTERED krmzejob [10:13:23.281]
DBGMISC: Input Args(failed=1),(errnum=-19624) [10:13:23.359]
(krmzejob)
It's trying to create the backuppiece and can't do so.
So I suspect that you have permission issues with the backup location.
eg.
How to Configure RMAN to Write to Shared Drives on Windows
NT/2000/2003 (Doc ID 145843.1)
You said that the rest of the backup works, except for the autobackup.
So please show me the result of the following:
RMAN> show all;
RMAN> backup datafile 1;
SQL> show parameter control
I'm thinking that we need to configure the autobackup and snapshot
controlfile locations to wherever your datafile backup goes. I
But please show me the above and see what we get.
Cheers,
Leng Burgess.
On Tue, Aug 21, 2018 at 3:19 AM, Jeff Chirco <backseatdba@xxxxxxxxx>
wrote:
Sorry you are right the backup portion is running, it just last part
that is not.
Thanks for your help!
RMAN> backup current controlfile;
Starting backup at 20-AUG-18
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=197 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current control file in backupset
channel ORA_DISK_1: starting piece 1 at 20-AUG-18
RMAN-00571:
===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS
===============
RMAN-00571: ==============================
=============================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at
08/20/2018 10:17:
26
ORA-19599: block number 10014 is corrupt in control file
C:\ORACLEXE\APP\ORACLE\
PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE2.ORA
On Sun, Aug 19, 2018 at 12:39 AM Leng <lkaing@xxxxxxxxx> wrote:
What do you meany by ‘my Rman backups are failing everyday’? Is it
the entire backup or just the last part where it tries to do an
autobackup?
You could try turning on debug as follows:
Rman> debug on;
Rman> spool trace to ‘c:\temp\ctl.debug;
Rman> backup current control file;
Rman> spool trace off
Please email the trace file and output from the above and I’ll have
a quick look...
Cheers,
Leng Burgess.
On 18 Aug 2018, at 12:58 am, Jeff Chirco <backseatdba@xxxxxxxxx>
wrote:
Thanks for the suggestions. I checked the drive space and it is not
an issue. However I did change the snapshot controlfile location to a
different disk and ran a backup spfile. Still getting same corruption
notice. It keeps talking about corruption in (file 0, block 10014). No
other errors in alert log.
We use this instance in retail locations and there haven't been any
issues with the database, and it gets rebooted every night. Just my
rman
backups are failing everyday. Good thing we also do data pump exports.
On Thu, Aug 16, 2018 at 4:16 PM LK <lkaing@xxxxxxxxx> wrote:
Yep, agreed.
Try using a different drive that has plenty of free space and do
the tests that I've outlined before...
eg:
RMAN> CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'F:\DBA\SNAPCF_XE.F';
And take an spfile backup - this should genereate a new snapshot
controlfile:
RMAN> backup current controlfile;
I'd also get the sysadmin to do hardware/os/firmware check of the
server in case this is just the tip of the iceberg... is there
corruption
in the underlying hardware/storage/firmware etc.
And check the alert.log - have you got other issues as well?
Cheers,
Leng Burgess.
On Fri, Aug 17, 2018 at 8:38 AM, Andrew Kerber <
andrew.kerber@xxxxxxxxx> wrote:
You may simply be out of space.
Sent from my iPad
On Aug 16, 2018, at 17:35, Jeff Chirco <backseatdba@xxxxxxxxx>
wrote:
Yes I have 3 control files but this is not a control file, its the
snapshot control file. I have deleted this snapshot file and it
recreates
it as corrupt. I am wondering which control file could be corrupt.
On Thu, Aug 16, 2018 at 1:19 PM Mladen Gogala <
gogala.mladen@xxxxxxxxx> wrote:
On 08/15/2018 07:21 PM, Jeff Chirco wrote:
I have an 10g XE database that is failing during rman backup.snapshot
ORA-19624: operation failed, retry possible
ORA-19599: block number 10014 is corrupt in control file
C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE.ORA
I am not sure what SNCFXE.ORA is but I believe it is some
control file backup. Anybody know how to recover for this? DoI need
to do a full recovery from controlfile trace?
Hopefully, you have more than one control file? If you do, please
copy
the correct one over the corrupt
C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SNCFXE.ORA
file.
Check your control_files parameter in the instance. If you don't
have
more than one, try dumping it to trace (ALTER DATABASE BACKUP
CONTROLFILE TO TRACE AS 'C:\temp\ctlfile.sql' NORESETLOGS) then
shutting
down the instance and re-creating the control file.
--
Mladen Gogala
Database Consultant
Tel: (347) 321-1217
--
//www.freelists.org/webpage/oracle-l
