Ok. that helps a lot. thank you. On Thu, Feb 24, 2011 at 9:45 AM, Li Li <litanli@xxxxxxxxx> wrote: > you can fix this by renaming the emc device names, such as: > > # emcpadm rename -s emcpowera -t emcpowerb > > this renames emcpowera to emcpowerb. > > before you do this: you can run 'emcpadm getused' to see what names > have been used, and run 'emcpadm getfree' to see what names are > available for you to use as an intermediate variable because you > mostly would have more than 1 LUN presented. > > > > On Thu, Feb 24, 2011 at 8:36 AM, Andrew Kerber <andrew.kerber@xxxxxxxxx> > wrote: > > Well, our systems guy is having trouble getting the storage configured > > correctly on Powerpath for or new 11gR2 cluster. His problem is getting > the > > storage to appear in the same position on both nodes, ie slice 1 needs to > > show up as emcpowera on both nodes a and b, slice 2 as emcpowerb, etc, > and > > he is having trouble getting there. > > > > Can anyone point us to a step-by-step guide for setting this up? > Normally I > > get involved after this step, so I have no idea on how to do it. I > searched > > MOS and didn't find anything. Of course, that may just mean I didnt do > the > > exactly right search... > > > > Note that afaik, asmlib is not available for Sun-sparc, so we cant work > > around the problem by stamping the disks. I have suggested that he > contact > > EMC support, but he I expect that will take a while. > > > > -- > > Andrew W. Kerber > > > > 'If at first you dont succeed, dont take up skydiving.' > > > -- Andrew W. Kerber 'If at first you dont succeed, dont take up skydiving.'