No setup needed for AWR. It comes default with the install. Arul On 2/7/07, VIVEK_SHARMA <VIVEK_SHARMA@xxxxxxxxxxx> wrote:
Thanks Arul Is AWR Setup on RAC 10gR2 Easy or Difficult? Am Yet to go thru the same Cheers ------------------------------ *From:* Arul Ramachandran [mailto:contactarul@xxxxxxxxx] *Sent:* Wednesday, February 07, 2007 11:56 PM *To:* VIVEK_SHARMA *Cc:* oracle-l *Subject:* Re: Statspack setup for 2nd RAC instance ?...basic Qs If it is 10GR2 why statspack? Just use AWR. Arul **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***
-- Arul