RE: SOLVED ...........RE: "cluvfy" setup for RAC Pre-installation setup Checks for 10gR2 .........
- From: "Hallas, John" <john.hallas@xxxxxxx>
- To: <VIVEK_SHARMA@xxxxxxxxxxx>, <oracle-l@xxxxxxxxxxxxx>
- Date: Tue, 21 Nov 2006 13:37:33 +0100
I am sure it does not NEED to be run from the CD. I am certain I have
never run it from the CD
________________________________
From: oracle-l-bounce@xxxxxxxxxxxxx
[mailto:oracle-l-bounce@xxxxxxxxxxxxx] On Behalf Of VIVEK_SHARMA
Sent: Tuesday, November 21, 2006 7:33 AM
To: oracle-l@xxxxxxxxxxxxx
Subject: SOLVED ...........RE: "cluvfy" setup for RAC Pre-installation
setup Checks for 10gR2 .........
Issue Resolved.
Solution - Before Oracle Clusterware installation, CVU needs to be Run
directly from the Oracle CD.
For the 10gR2 Software CD with On Solaris 10
$ cd /oradvd2/clusterware/cluvfy
$ runcluvfy.sh -help
USAGE:
cluvfy [ -help ]
cluvfy stage { -list | -help }
cluvfy stage {-pre|-post} <stage-name> <stage-specific options>
[-verbose]
cluvfy comp { -list | -help }
cluvfy comp <component-name> <component-specific options> [-verbose]
Note: The script runcluvfy.sh contains temporary variable definitions
which enable it to be run before installing Oracle Clusterware or Oracle
Database. After you install Oracle Clusterware, use the command cluvfy
to check prerequisites and perform other system readiness checks.
Note: You must have the utility unzip installed and configured with a
path command for runcluvfy.sh to run.
HTH
Vivek
________________________________
From: oracle-l-bounce@xxxxxxxxxxxxx
[mailto:oracle-l-bounce@xxxxxxxxxxxxx] On Behalf Of VIVEK_SHARMA
Sent: Monday, November 20, 2006 7:17 PM
Folks
Running $ORACLE_HOME/bin/cluvfy gives message:-
"<ORACLE_HOME>/bin/cluvfy: /bin/cluvfy: not found"
Thereafter I created a symbolic Link in "/bin" directory of file cluvfy.
$ su
# cd /bin
# ln -s <Local Directory containing copy of cluvfy>/cluvfy cluvfy
Thereafter $ORACLE_HOME/bin/cluvfy gives a BLANK line & control does NOT
return to Unix prompt. Need to press Ctrl C to get control back.
Running $ truss cluvfy gives Output running indefinitely.
NOTE - $ORACLE_HOME is a NON-RAC Oracle 10gR2 installation on Solaris
10.
Qs 1 Is using cluvfy obtained from a NON-RAC Oracle installation OK or
should it be Copied directly from the CD?
Qs 2 Does cluvfy need to be run as root user , Oracle user or any dba
(unix) group user?
Qs 3 Any Other ideas?
Thanks indeed
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended
solely for the use of the addressee(s). If you are not the intended
recipient, please notify the sender by e-mail and delete the original
message. Further, you are not to copy, disclose, or distribute this
e-mail or its contents to any other person and any such actions are
unlawful. This e-mail may contain viruses. Infosys has taken every
reasonable precaution to minimize this risk, but is not liable for any
damage you may sustain as a result of any virus in this e-mail. You
should carry out your own virus checks before opening the e-mail or
attachment. Infosys reserves the right to monitor and review the content
of all messages sent to or from this e-mail address. Messages sent to or
from this e-mail address may be stored on the Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
Other related posts:
