Hi Mark,
I tried the 2 suggestions that you gave and both ended up being hung. I used
strace for each command and have attached the output in the attached zip file.
If you have time and could look that would be great but if you don’t have time
I do understand.
I have also sent this info the Oracle. They have also asked for an SOS report
which I think is usually for Oracle Linux but I’m gonna that one too.
I feel like this is something that is going to have to be addressed with my SA
but they are telling me that all looks fine from their side, so I’m hoping I
can gather enough info to try and communicate my issue.
Thanks for your help!
Sallie
From: Mark J. Bobak <mark@xxxxxxxxx>
Sent: Thursday, September 26, 2019 4:48 PM
To: Sallie Cottingham <Sallie.Cottingham@xxxxxxxxxx>
Cc: ORACLE-L <oracle-l@xxxxxxxxxxxxx>
Subject: Re: Problem with ORACLEASM SCANDISKS
Hi Sallie,
I'm mostly on to AFD (ASM Filter Driver) now, so it's been a while since I ran
ASMLib, and even longer since I was on RAC.
But, if 'oracleasm scandisks' doesn't work, I can think of a could of things to
try:
1.) what if you do 'oracleasm scandisks /dev/sda1 /dev/sdb1 /dev/sdc1', where
/dev/sda1, /dev/sdb1/ /dev/sdc1 are the newdisks you're adding? That should
make it much faster, not having to scan all the disks, just the one(s) you have
recently added.
2.) What if you first do a 'sudo /sbin/partprobe', then try the scandisks?
-Mark
On Thu, Sep 26, 2019 at 4:18 PM Sallie Cottingham
<Sallie.Cottingham@xxxxxxxxxx<mailto:Sallie.Cottingham@xxxxxxxxxx>> wrote:
I am adding new disks to a 2 node RAC using ORACLEASM/ASMLIB. I’ve stamped the
new disk just fine on node 1 but now on node 2 when I run SCANDISKS, it just
hangs. I read somewhere that someone had a problem with it being slow, so I
left it there over 30 minutes and it was still hung. I couldn’t CTRL-C out of
it – had to just shut down my session. I have 3 RAC environments and have
done this process many times with no problems.
I opened a ticket with Oracle and it was routed to the Linux group who is
asking me for a CSI number that includes Linux support. I’m running RHEL7, not
Oracle Linux so I don’t have a CSI. I’ve asked if I need to go to RedHat with
this question, but haven’t gotten any response back from Oracle.
So I’m hoping that someone on this list might have encountered something like
this and can tell me where I need to go to get help on this.
Thanks,
Sallie Cottingham, OCP
Database Administrator
Comptroller of the Treasury
Technology Solutions
425 Fifth Avenue North
Nashville, TN 37243-34001
sallie.Cottingham@xxxxxxxxxx<mailto:sallie.Cottingham@xxxxxxxxxx>
615-401-7962
Attachment:
strace_output.zip
Description: strace_output.zip