RE: Oracle RAC private Interconnect
- From: Sanjay Mishra <smishra_97@xxxxxxxxx>
- To: "Kerber, Andrew W." <Andrew.Kerber@xxxxxxx>, oracle-l@xxxxxxxxxxxxx
- Date: Fri, 13 Jul 2007 10:44:35 -0700 (PDT)
Andrew
YEs that is fine as it will be done after clusterware is installed manually
if not invoked by Clusterware installed as there is bug due to IP addresses. My
concern is to get information about the Bonding and multipathing. I am
searching for some information on Google and I appreciate if you have any link
and advice on this setup.
Sanjay
"Kerber, Andrew W." <Andrew.Kerber@xxxxxxx> wrote:
You also have to set up the virtual ip, which is what is used
in the failover. Run vipca. Also, be sure and run cluvfy
-----Original Message-----
From: oracle-l-bounce@xxxxxxxxxxxxx [mailto:oracle-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Sanjay Mishra
Sent: Friday, July 13, 2007 11:03 AM
To: oracle-l@xxxxxxxxxxxxx
Subject: Oracle RAC private Interconnect
It is recommended to use two Gigabit Switches for RAC Node Interconnect
communication to provide Redundancy and performance. Is there any setup
required on beside configuring two interface like eth1 and eth2 and then
specifying them in RAC cluster installation PRIVATE Interconnect screen.
I am just trying to understand that how the failover or redundancy is
achieved if I unplug one of the Cable on one Node. Is it been configured by RAC
clusterware or I had to tell something to sysadmin.
Also how performance is achieved in using two Switches.
I am currently having 10g RAC on sun SOlaris 10 with one Gigabit Switch for
QA environment and planning for Production hardware requirements.
Also If I use Oracle 10g ASM for Storage and RAW device for OCR and Voting
Disk. I am using EMC with Two SAN switches and so 2HBA on each Node. Anybody
has any doc for Multipathing with EMC. My concern is that both nodes see the
RAW Device LUN as well as ASM luns as same and two HBA should provide the high
availability when I will remove one of the HBA
Thanks
Sanjay
---------------------------------
Get the Yahoo! toolbar and be alerted to new email wherever you're surfing.
------------------------------------------------------------------------------
NOTICE: This electronic mail message and any attached files are confidential.
The information is exclusively for the use of the individual or entity intended
as the recipient. If you are not the intended recipient, any use, copying,
printing, reviewing, retention, disclosure, distribution or forwarding of the
message or any attached file is not authorized and is strictly prohibited. If
you have received this electronic mail message in error, please advise the
sender by reply electronic mail immediately and permanently delete the original
transmission, any attachments and any copies of this message from your computer
system. Thank you.
==============================================================================
---------------------------------
Yahoo! oneSearch: Finally, mobile search that gives answers, not web links.
Other related posts:
