RE: Linux multipathing for 10g DB on SAN storage
- To: "Magni Fabrizio" <Fabrizio.Magni@xxxxxxxxx>
- Date: Thu, 16 Feb 2006 11:17:25 +0100
Hi Fabrizio,
That didn't work very well in my tests. I'd be really interested in
hearing from you if you have had any success using it with Oracle DBs
(possibly when many LUNs are used with ASM or for raw access).
Cheers,
L.
-----Original Message-----
From: Magni Fabrizio [mailto:Fabrizio.Magni@xxxxxxxxx]
Sent: Thursday, February 16, 2006 8:49 AM
To: Luca Canali; oracle-l@xxxxxxxxxxxxx
Subject: RE: Linux multipathing for 10g DB on SAN storage
Hi Luca,
not many chances for a multipath there.
But you can rely on the failover capabilities of qlogic driver.
Not many changes are necessary.
Regards
Fabrizio
> Storage is on FC arrays attached via SAN, HBAs from Qlogic. I have
> dual-ported HBAs, dual-controller storage arrays and redundant fiber
> channel switches.
> Note: devmapper (2.6 kernel solution) is not available because I am on
> RHEL 3 and EMC powerpath of course is also not viable with my HW.
--
//www.freelists.org/webpage/oracle-l
Other related posts:
