Re: How to UPGRADE CATALOG in RMAN after post release upgrade?
- From: "Jared Still" <jkstill@xxxxxxxxx>
- To: "Oracle-L Freelists" <oracle-l@xxxxxxxxxxxxx>
- Date: Thu, 27 Dec 2007 11:38:54 -0800
This thread highlights the importance of building and using a test system
for RMAN backups and recoveries.
There are few things more important that being able to recover a database.
For a DBA, that is probably the single most important item to be sure of.
On Dec 27, 2007 6:26 AM, <krish.hariharan@xxxxxxxxxxxx> wrote:
> It would be prudent to test the recovery given this change. While this
> depends on how you test recoveries, one easy way is to create a dummy
> tablespace in production, have it backed up as you normally would and then
> recover a file of this dummy tablespace with a roll forward.
>
>
>
> -Krish
>
>
> ------------------------------
>
> *From:* oracle-l-bounce@xxxxxxxxxxxxx [mailto:
> oracle-l-bounce@xxxxxxxxxxxxx] *On Behalf Of *Shastry(DBA)
> *Sent:* Thursday, December 27, 2007 6:34 AM
> *To:* Mercadante, Thomas F (LABOR)
> *Cc:* oracle-l
> *Subject:* Re: How to UPGRADE CATALOG in RMAN after post release upgrade?
>
>
>
> Hi all,
>
> Thanks for your immediate responses and help, I really Thank for all the
> gurus who are giving valuable suggestions and guidelines.
>
> We took a risk in upgrading the catalog, as Peter suggested the upgrade
> went, but with few errors as some RMAN backups were running during the
> upgrade process.
>
> we saw many RMAN error alerts later and resubmitted and it is going fine.
> Let me know if i have more suggestions on this.
>
> Thanks a ton,
> Ananth
>
> On Dec 27, 2007 6:44 PM, Mercadante, Thomas F (LABOR) <
> Thomas.Mercadante@xxxxxxxxxxxxxxxxx> wrote:
>
> Ananth,
>
>
>
> My guess is that you would run the Rman executable out of the 10.2.0.3Oracle
> home connecting to the existing catalog, and then issue the UPGRADE
> CATALOG command. But that is just a guess.
>
>
>
> A caution though - if you do this, your existing Rman backups for other
> 10.2.0.1 databases may not work. You need to test this!
>
>
>
> I would test by creating a new 10.2.0.3 rman catalog and registering some
> of the older databases in it. If they register ok, then you should not have
> a problem, and you could go ahead and upgrade your existing catalog.
>
>
>
> You will probably be ok. The Rman catalog is pretty stable - no changes
> between releases (especially between the releases that you are going thru).
> We are running two rman catalogs (9.2.0.7 & 10.2.0.2) in a 9.2.0.7database
> with no problems at all.
>
>
>
> Good Luck!
>
>
>
> Tom
>
>
> ------------------------------
>
> *From:* oracle-l-bounce@xxxxxxxxxxxxx [mailto:
> oracle-l-bounce@xxxxxxxxxxxxx] *On Behalf Of *Shastry(DBA)
> *Sent:* Thursday, December 27, 2007 7:35 AM
> *To:* oracle-l
> *Subject:* How to UPGRADE CATALOG in RMAN after post release upgrade?
>
> Hi Gurus,
>
> We have upgraded the PROD from 10.2.01 to 10.2.0.3 and we are at the stage
> where oracel is asking for RMAN catalog upgrade as we are using RMAN for
> backup purpose
> How to do this basically?
> If we do Catalog upgrade,Will this affect to other RMAN backups?
>
> we are using common catalog for many prod databases backup.
>
> I am looking for some light...like whether can we upgrade and how to do
> so....
>
> Will this affect other RMAN backups?
>
> But I see the Oracle upgrade readme says the below information, but
> doesn't say how to do it exactly.
>
> If you are using the Oracle Recovery Manager catalog, enter the following
> command:
>
> $ rman catalog username/password@alias
> RMAN> UPGRADE CATALOG; If you are using the Oracle Recovery Manager
> catalog, enter the following command:
>
> $ rman catalog username/password@alias
> RMAN> UPGRADE CATALOG;
>
> Can anyone please help me out on this as I am not aware much on RMAN?
>
> Thanks,
> Ananth
>
>
>
>
>
>
>
--
Jared Still
Certifiable Oracle DBA and Part Time Perl Evangelist
Other related posts:
