Re: 12c Agent not talking
- From: Ryan January <rjjanuary@xxxxxxxxxxxxxxxx>
- To: oracle-l@xxxxxxxxxxxxx
- Date: Wed, 21 Aug 2013 15:06:45 -0500
The only time I've witnessed the EM agent use a non-standard port is
when the default port was already in use by another process at install
time. Are you sure the old agent was stopped prior to deploying the new
agent?
What I ultimately ended up doing to insure the install was to my liking
was a manual deployment, using a modified agent response file, forcing
the proper config. As an example; if the desired port was in use the
installer would error out rather than continue.
Since you haven't yet performed a discovery, I'd suggest reinstalling
the agent. It's much simpler and quicker than modifying the agent
config on both server and client.
On 08/21/2013 12:47 PM, Storey, Robert (DCSO) wrote:
> Having some trouble with 2 agents I just deployed.
> Control box is 64bit W2008 running 12.1.0..3 EM. My summary page shows 2
> platforms (w2008 and w2003). If I select Targets/Hosts I see 4 boxes.
>
> EM box - 64bit W2008R2 shows up as status Green and I see the metric Data.
> Box A = W2003 32bit. Shows up in Hosts as status Green and I get metric data
> from it.
> Box B = W2008R2 64bit shows up as Unknown status with an error in Metric
> Collection
> Box C = W2008R2 64bit shows up as Unknown status with an error in Metric
> collection.
> Box D = W2008R264bit (agent install error on perl lib. Working with oracle on
> that one....not going well).
>
> Enterprise Summary (host) shows the 2 platforms that are green status under
> Inventory and Usage.
>
> Both Box B and C - I can go to the boxes and the agent home, execute emctl
> status agent and get good status back. Both agents see the EM box and the
> upload ports and heartbeats check. Box B shows last successful upload as 3
> hours prior to this email, but no uploads pending. Box B shows 'none' for
> last successful and attempted upload.
>
> In EM, the metric collection error is the same Metric evaluation error
> start - Unable to connect to agent at https:\\<host>:port/emd/main
> [Connection timed out: connect]
>
> For box B, this is port 1830. Not sure how it got to be 1830 as I didn't set
> that as a default. Box C it is 3872. I have had the system admin make sure
> that both of those ports on their respective boxes were open for outgoing and
> that were open for receiving on the target boxes.
>
> Is there another log I'm missing somewhere that would give me more
> information on this. Something else I can check. I've been crawling through
> MOS but I'm not seeing this error or any resolution so far in the agent
> troubleshooting docs.
>
> I've not done any target discovery yet. I've only installed agents on the
> target boxes to get the comms working between targets and EM.
>
> Thoughts?
>
> --
> //www.freelists.org/webpage/oracle-l
>
>
--
------------------------------------------------------------------
This email is intended solely for the use of the addressee and may
contain information that is confidential, proprietary, or both.
If you receive this email in error please immediately notify the
sender and delete the email..
------------------------------------------------------------------
--
//www.freelists.org/webpage/oracle-l
Other related posts:
