Re: 10g R2 Oracle Net Configuration- Problem during 2 node RAC installation on RHEL 5
- From: "Shastry(DBA)" <shastry17@xxxxxxxxx>
- To: Chandra Pabba <Chandra_Pabba@xxxxxxxxxxx>, FMHabash <fmhabash@xxxxxxxxx>, Yavor Ivanov <Yavor_Ivanov@xxxxxxxx>, oracle-l <oracle-l@xxxxxxxxxxxxx>, ora-apps-dba@xxxxxxxxxxxxx, avadhanimys@xxxxxxxxx
- Date: Sun, 22 Feb 2009 21:57:13 +0530
Hi Achutha (Avadhani)... Thanks a ton, and thanks all for your valuable
information, I followed this and did fix the issue. Bingo My RAC is up and
running.. it was a wonderful journey all the way in implementing RAC by
using available resource.
Thanks,
Ann(Shastry)
On Sun, Feb 22, 2009 at 1:25 PM, Avadhani mys <avadhanimys@xxxxxxxxx> wrote:
> Hi Ann,
> This could be the problem with the vipca failing on non-routable VIP IP
> ranges, manually or during root.sh)
>
> Even i had same issue and i resolved by doing below mentioned steps and if
> you have multiple entries delete and reconfigure.Restart DBCA it works
>
> Please make sure you have met the requirements to install 10R2 (follow
> metalink note 419646.1)
>
> ORA_CRS_HOME/bin/oifcfg getif
> ORA_CRS_HOME/bin/oifcfg delif -global eth0
> ORA_CRS_HOME/bin/oifcfg delif -global eth1
>
> ORA_CRS_HOME/bin/oifcfg setif -global eth0/192.168.1.0:public
> ORA_CRS_HOME/bin/oifcfg setif -global eth1/192.168.1.0:
> cluster_interconnect
>
>
> Regards,
> Avadhani Mysore
>
>
> On Sat, Feb 21, 2009 at 11:25 AM, Chandra Pabba <Chandra_Pabba@xxxxxxxxxxx
> > wrote:
>
>> Check if ML Note: 387396.1 helps.
>>
>>
>>
>> Thanks
>>
>> Chandra
>>
>>
>>
>> *From:* oracle-l-bounce@xxxxxxxxxxxxx [mailto:
>> oracle-l-bounce@xxxxxxxxxxxxx] *On Behalf Of *Shastry(DBA)
>> *Sent:* Friday, February 20, 2009 2:56 PM
>> *To:* FMHabash
>> *Cc:* Yavor Ivanov; oracle-l; ora-apps-dba@xxxxxxxxxxxxx;
>> avadhanimys@xxxxxxxxx
>>
>> *Subject:* Re: 10g R2 Oracle Net Configuration- Problem during 2 node RAC
>> installation on RHEL 5
>>
>>
>>
>> Thanks all,
>>
>>
>>
>> I was able to proceed with VIPCA and NETCA configuration successfully, but
>> stuck with the below error while running DBCA
>>
>>
>>
>> ORA-27504: IPC error creating OSD context
>> ORA-27300: OS system dependent operation:skgxpcini failed with status: 0
>> ORA-27301: OS failure message: Error 0
>> ORA-27302: failure occurred at: past_inmemor
>>
>>
>>
>> Please let me know if anyone has any workarounds as metalink didnt show up
>> some light :(.
>>
>>
>>
>> Thanks,
>>
>> Ann
>>
>> On Fri, Feb 20, 2009 at 8:33 PM, FMHabash <fmhabash@xxxxxxxxx> wrote:
>>
>> I've run into a similar issue because our env has multiple OH owned by
>> different users. Trying to add one VIP dependent resource onto another home
>> caused this error.
>> We fixed it by running crs-setperm resource-name -u user:oracle:rwx
>>
>> Please refer to note 3584146.8.
>>
>> Thank you
>>
>>
>> -----Original Message-----
>> From: Shastry(DBA) <shastry17@xxxxxxxxx>
>>
>> Sent: Friday, February 20, 2009 9:32 AM
>> To: Yavor Ivanov <Yavor_Ivanov@xxxxxxxx>
>> Cc: oracle-l <oracle-l@xxxxxxxxxxxxx>; ora-apps-dba@xxxxxxxxxxxxx <
>> ora-apps-dba@xxxxxxxxxxxxx>; avadhanimys@xxxxxxxxx
>> Subject: Re: 10g R2 Oracle Net Configuration- Problem during 2 node RAC
>> installation on RHEL 5
>>
>> Hi,
>>
>> I was able to pass through VIPCA successfully after doing some changes.
>> But
>> I am stuck in configuring LISTENER by using NETCA.Please help me.
>>
>> Thanks,
>> Ann
>>
>> On Fri, Feb 20, 2009 at 2:24 PM, Yavor Ivanov <Yavor_Ivanov@xxxxxxxx>
>> wrote:
>>
>> > Did you insisted on VIPCA to succeed? It usually fails
>> > when started by OUI and needs to be ran manually
>> >
>> >
>> >
>> > Regards,
>> >
>> > Yavor Ivanov
>> >
>> >
>> >
>> > *From:* oracle-l-bounce@xxxxxxxxxxxxx [mailto:
>> > oracle-l-bounce@xxxxxxxxxxxxx] *On Behalf Of *Shastry(DBA)
>> > *Sent:* Friday, February 20, 2009 9:30 AM
>> > *To:* oracle-l
>>
>> > *Cc:* ora-apps-dba@xxxxxxxxxxxxx
>> > *Subject:* 10g R2 Oracle Net Configuration- Problem during 2 node RAC
>> > installation on RHEL 5
>> >
>> >
>> >
>>
>> > Hi Gurus,
>> >
>> >
>> >
>> > I am trying to setup RAC with 10g R2 and could suceed till Oracle
>> software
>> > installation, while configuring listener I am facing the below problem,
>> dont
>> > know is it related to any permission issue. Could anyone please show me
>> the
>> > light OR lend me the RAC setup (10g R2 on RHEL 5)? Thanks in advance.
>> >
>> >
>> >
>> > Error Details:
>> >
>> >
>> >
>> > Problem in configuration: Nodes(s): linux1: CRS-0213: Could not register
>> > resource 'ora.linux1.LISTENER_LINUX1.lsnr'.
>> >
>> > Nodes(s): linux2: CRS-0213: Could not register resource
>> > 'ora.linux1.LISTENER_LINUX2.lsnr'.
>> >
>> >
>> >
>> > Try again?
>> >
>> >
>> >
>> > If anyone can let me know the installation blog/ doc it will be really
>> > helpful.
>> >
>> >
>> >
>> > Thanks,
>> >
>> > Ann
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>>
>
>
Other related posts:
