[optimal] Re: Scan head monitor setup / orientation on the OPTOS 200Tx

  • From: Stuart Alfred <stuart.alfred@xxxxxxxxx>
  • To: OPTIMAL <optimal@xxxxxxxxxxxxx>
  • Date: Thu, 2 Jul 2020 10:55:49 -0400

Alan,

THANK YOU.  I will check when the Optos team is in house for this update.
Great heads up, sir!

Stay safe, warmest personal regards.  Stu
Stuart Alfred / 317-517-9455 / stuart.alfred@xxxxxxxxx





On Thu, Jul 2, 2020 at 5:00 AM Alan J Truhan <ajtruhan@xxxxxxxxx> wrote:

“ she knows how to make adjustments to the setting on the monitor between
time of injection & 30 seconds”

Do you mean brightness/ contrast adjustments? There’s an update about a
year ago that has auto adjustment for this and it works great.



On Wed, Jul 1, 2020 at 12:06 PM Paul Paquette <dmarc-noreply@xxxxxxxxxxxxx>
wrote:

I've worked with Optos cameras with monitor on both sides. You need to
become ambidextrous.

Since our RN prefers to use right arm for injections, I prefer the
monitor to be on the left. Although many times the left arm has the better
vein so I need to shift to the right side & if needed, she knows how to
make adjustments to the setting on the monitor between time of injection &
30 seconds (along with removing needle) which is when I switch eyes &
reposition myself to the left side.

Since getting the California we've dubbed the TX200 the "T-Rex". Lots of
nice new features & definitely improved resolutions with the Cal. But I
still like some of the feature of that old T-Rex. Maybe because that's what
I learned on & I'm becoming a dinosaur myself LOL!!

Stay safe everyone,
Paul


-----Original Message-----
From: Alf Whyte <awhyte@xxxxxxxxx>
To: OPTIMAL@xxxxxxxxxxxxx
Sent: Wed, Jul 1, 2020 8:08 am
Subject: [optimal] Re: Scan head monitor setup / orientation on the OPTOS
200Tx

That's my setup and I also am right handed. With some patients l use both
hands to hold head, and raise eyebrow and/or lids + remote. Six fingered
hands would be a big help!

Cork, Ireland.

On Wed., 1 Jul. 2020, 3:59 pm Stuart Alfred, <stuart.alfred@xxxxxxxxx>
wrote:

Group,
Always sleep better when I get confirmation from your crowd experience -

In pre planning stage for the Optos 200Tx (ivfa) to be relocated to our
satellite office - squeezed into a room with a Spectralis.
 Please advise:
During set up of this device I can arrange the Scan head *monitor *on
either the right or left of the Scan *head*.  Being right hand dominant,
it would make sense *to me* to place this monitor on the right side of
the scan head (and operating it from that R side w/remote), and use my left
hand to support the patient's head when needed.  Does that in fact work
well in your actual use of this device - assuming you too are right handed?

Stay vigilant,
Stuart

Stuart Alfred / 317-517-9455 / stuart.alfred@xxxxxxxxx




Other related posts: