[optacon-l] Power adapters for Optacons

  • From: Noel Runyan <noel@xxxxxxxxxxxxxxxxxxxxxxx>
  • To: optacon-l@xxxxxxxxxxxxx,optacon-l@xxxxxxxxxxxxx
  • Date: Wed, 25 Mar 2020 14:32:20 -0700

All,
Richard Oehm and I have been discussing power adapters for the 
Optacons, and I agreed to summarize our thoughts here.
Caution: the Optacon II or R2 has a different power system that only 
charges batteries externally, using a custom AC or lines power 
adapter with a non-standard plug.  , Oehm Electronics can modify the 
R2 chargers to give a vibrating indication for when they are charging properly.
The following comments will be regarding only the original Optacon, 
the R1 or Optacon I.
If using an Optacon R1 without its internal battery connected, you 
should not power it with the original TSI supplied charger, as it 
could damage the Optacon's circuits.  Instead, you should use a 
regulated 5 volt adapter.  Richard Oehm has a friend at Minuteman 
Electronics, Doug Heim, who has a supply of the proper replacement 
power adapter units with the correct Optacon R1 plugs on the cable 
end. This week, we've talked to Doug and given him the specifications 
for the Optacon power adapter.  Here is what you need to know to 
order an Optacon adapter from Minuteman.
-
Minute Man Electronics
16424 Bristow Court.
Grass Valley, CA 95949, USA
Tel: 530-271-0400 Fax: 530-271-0800
Email: sales@xxxxxxxxxxxxxx
Contact:  Doug Heim
Item Description for Optacon regulated 5 volt charger:
S6-051A5V-206IP-12MM WALL Transformer LEVEL 6 WITH 2.5 X5.5 X 11MM plug.
Price:  $7.95 (USA)
Shipping is separate and depends on where you live.
-
Some folks on this list have asked where they can get a cable adapter 
to let them use the more compact and common USB power adapters.
We have found a source for a cable adapter with a USB plug on one end 
and an Optacon coax barrel plug on the other end.  These are 
inexpensive but have to be shipped from China, with currently long 
shipping delays and a minimum order quantity requirement.
For a near-term solution, we've found and I've ordered a USB cable 
adapter kit that includes the proper adapter cable for the 
Optacon.  I'll test it out as soon as it arrives, and I'll let the 
listers know about it, if it works.
Please keep in mind that using either the Minuteman adapter or a USB 
adapter on an Optacon R1 that has a battery inside may work to run 
the Optacon off AC lines power, but it will not have a high enough 
voltage to charge the battery.
Cordially,
Noel
-
Noel H. Runyan
Phone: 1-408-866-7564
Email: Noel@xxxxxxxxxxxxxxxxxxxxxxx
-
      

to view the list archives, go to:

www.freelists.org/archives/optacon-l 

To unsubscribe at any time, just send a message to:

optacon-l-request@xxxxxxxxxxxxx with the word "unsubscribe" (without the 
quotes) in the message subject.  

Tell your friends about the list.  They can subscribe by sending a message to:

optacon-l-request@xxxxxxxxxxxxx with the word "subscribe" (without the quotes) 
in the message subject.  

Other related posts:

  • » [optacon-l] Power adapters for Optacons - Noel Runyan