Thanks Tom, ----- Original Message ----- From: "Tom McMahon" <TLM@xxxxxxxxxx> To: <opendtv@xxxxxxxxxxxxx> Sent: Saturday, February 05, 2005 2:27 AM Subject: [opendtv] Re: object-based compression See: http://www.mpeg.org/MPEG/index.html D: One of the sites I would have explored later anyway. Looks like it improved considerably since I was there last. and http://www.tek.com/Measurement/cgi-bin/framed.pl?Document=/Measurement/programs/mpeg_fundamentals/index.html&FrameSet=television D: Humm, I think I remember that one, believe I did get me a print copy of that one many a moon ago.... Just got too much stuff overhere;-). Donald -----Original Message----- From: opendtv-bounce@xxxxxxxxxxxxx [mailto:opendtv-bounce@xxxxxxxxxxxxx] On Behalf Of Donald Koeleman Sent: Friday, February 04, 2005 5:15 PM To: opendtv@xxxxxxxxxxxxx Subject: [opendtv] Re: object-based compression ----- Original Message ----- From: "Rob Koenen (ieee)" <rob.koenen@xxxxxxxx> To: <opendtv@xxxxxxxxxxxxx> Sent: Saturday, February 05, 2005 1:54 AM Subject: [opendtv] Re: object-based compression > actually I was refering to mpeg 2, to put me straight on the issue of > macro-block, sampling, dct and so... Hmmm, yeah, well, right. Google can help you much better finding MPEG-2 resources than me. Best, Rob This seems to carry roughly the same stuff as that EBU Technical review from the late nineties I mentioned. http://www.bretl.com/mpeghtml/MPEGindex.htm For the geeks: http://www.bretl.com/mechtvprogress2/mechtvprogress2.htm Donald ---------------------------------------------------------------------- You can UNSUBSCRIBE from the OpenDTV list in two ways: - Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.