Often called a "free space: measurement IIRC. As you say, it's the only way to do such a measurement and is difficult to do. The receiver system must be isolated from any other structures. -----Original Message----- From: opendtv-bounce@xxxxxxxxxxxxx [mailto:opendtv-bounce@xxxxxxxxxxxxx]On Behalf Of Doug McDonald Sent: Wednesday, June 17, 2009 12:38 PM To: opendtv@xxxxxxxxxxxxx Subject: [opendtv] Re: Transition report John Shutt wrote: > Indeed, the ATSC exciter does have an adaptive equalization routine, but > the sample point is taken at the output of the mask filter, not from a > probe at the top of the tower sampling the output of the antenna. > Thus at low VHF, that could be a big big problem if the antenna were not certified by the manufacturer for DTV. If I were a low DTV station, I would test the signal with a non-resonant receive antenna high in the air well away from the antenna (i.e. in the main lobe) on a spectrum analyzer. Doug ---------------------------------------------------------------------- You can UNSUBSCRIBE from the OpenDTV list in two ways: - Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. ---------------------------------------------------------------------- You can UNSUBSCRIBE from the OpenDTV list in two ways: - Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.