[opendtv] Re: DVB & MPEG-4 Part 10
- From: "Gary Sullivan" <garysull@xxxxxxxxxxxxxxxxxxxxx>
- To: <opendtv@xxxxxxxxxxxxx>, <mp4-tech-bounces@xxxxxxxxxxxxxxxx>
- Date: Sat, 26 Feb 2005 10:11:25 -0800
I believe the DVB standards you are looking for are the recently-revised
TS 101 154 and the new TS 102 005.
Best Regards,
Gary Sullivan
+> -----Original Message-----
+> From: opendtv-bounce@xxxxxxxxxxxxx=20
+> [mailto:opendtv-bounce@xxxxxxxxxxxxx] On Behalf Of Prashant Desai
+> Sent: Saturday, February 26, 2005 7:27 AM
+> To: mp4-tech-bounces@xxxxxxxxxxxxxxxx; opendtv@xxxxxxxxxxxxx
+> Subject: [opendtv] DVB & MPEG-4 Part 10
+>=20
+> Hello All=20
+> =20
+> are there any standards released by DVB for MPEG-4 Part 10=20
+> or H.264 AVC , coding standards ?=20
+> if so then kindly point me to the relevent page .........if=20
+> not then How a service provider planning to provide=20
+> services over H.264 AVC/MPEG-4 Part 10 will be able to=20
+> provide the DTV services ? i tried googling for an=20
+> IRD that can support MPEG-4 Part 10 but could not locate=20
+> it ........so does it mean that one has to use=20
+> transcoders that can transcode the DVB-MPEG-2 content=20
+> received by the IRD supporting DVB/MPEG-2 [coz i could not=20
+> locate the IRD product that supports MPEG-4 Part 10 coding] =20
+> must be converted to MPEG-4 part 10 using the necessary=20
+> transcoders ? =20
+>=20
+> How about DVB-S2 ? is it the DVB Standards that supports=20
+> MPEG-4 Part 10 coding format ? =20
+>=20
+>=20
+> pls advise=20
+>=20
+> regards,
+> Prashant Desai=20
+>=20
+>=20
+> =20
+> =20
+> -------------------------------------------------------------
+> ---------
+> You can UNSUBSCRIBE from the OpenDTV list in two ways:
+>=20
+> - Using the UNSUBSCRIBE command in your user configuration=20
+> settings at FreeLists.org=20
+>=20
+> - By sending a message to: opendtv-request@xxxxxxxxxxxxx=20
+> with the word unsubscribe in the subject line.
+>=20
+>=20
----------------------------------------------------------------------
You can UNSUBSCRIBE from the OpenDTV list in two ways:
- Using the UNSUBSCRIBE command in your user configuration settings at
FreeLists.org
- By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word
unsubscribe in the subject line.
Other related posts:
