"Francesco Piccinno" <stack.box@xxxxxxxxx> wrote: > I've a msi wind with a RTL8101E controller (10ec:8136), and I've > successfully ported the if_re network driver from freebsd source > tree, > but I've a little problem: I can receive packets (tcpdump shows me > packets in transit on haiku) but when I try to send packets with ping > I can see the packets on the source machine (tcpdump) but these ones > cannot reach their destination. AFAIK Dustin Howett has some pending changes to the rtl8169 driver that adds support for this chipset. In any case, if you have ruled out a problem on the Haiku side (best by enabling debug output in the lower layers, like ethernet or ARP), you could check if the driver believes to have send the packet, or if there was some kind of error that prevented it from doing so. Last but not least, it might also be helpful to see if your router shows any sign of activity when pinging from the Haiku machine. Oh, and looking at the ARP cache (using the "arp" command) might be helpful, too (but also only if you only try to reach the other machine from your Haiku machine, not vice versa). HTH. Bye, Axel.