[noCensorship] Re: Localproxy related questions
- From: "White Knight" <captain_nas@xxxxxxxxxxx>
- To: nocensorship@xxxxxxxxxxxxx
- Date: Wed, 01 Jun 2005 14:03:16 -0500
Hello again Wayne.
1- Yes, I am very much intrested in increasing my knowledge.
2- I live in U.A.E., so, I can't help you with KSA. anything you need to
know from U.A.E.?
3- The localproxy that I'm using is version 4.284 dated December 2, 2004.
Should I be using another version?
4- I have done the change form 10 to 1000 in the file globals.xml
<item key="maxNrHostsPerLayer">10</item>
the number of proxies increased to 16 in layer 0 and about 14 in layer 1,
but still there is no emprovement in localproxy behavior even after keeping
it running for 24 hours continuously. and now I am getting a new message
comming up on my monitor saying something like " the redirection from this
URL is over limit".
5- Running ipconfig returned the following:
connection-specific DNS suffix: Domain_not_set.invalid
IP address: 192.168.1.64
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
6- I downloaded from CVS the latest posted hosts.zip file and still the same
message of your hosts database is over 2 weeks old. Is there a way to
correct this?
I also downloaded from CVS all the files which were updated during the last
4 month and overwriten them over the old files but there was a problem in
starting localproxy's back end so, I had to restore the old ones and settle
with the globals.xml modification until I learn what should be done.
7- here is the section of the back end's log (at debug = 3), Please let me
know what would be your advice:
This is localProxy Engine (the 'back end'), version: 4.302
Building configuration UAE-ADSL
Please wait, this may take a few minutes
(you may avoid this in future by using the 'last' config)...
I'm assuming this IP address is 192.168.1.64
Waiting for the front end to connect ...
connected
Renaming hosts.xml to hosts.old.xml, unarchiving hosts.zip;
Use of uninitialized value in integer addition (+) at
C:/perl/lib/Time/Local.pm
line 76.
Use of uninitialized value in integer multiplication (*) at
C:/perl/lib/Time/Loc
al.pm line 76.
Use of uninitialized value in integer multiplication (*) at
C:/perl/lib/Time/Loc
al.pm line 76.
Use of uninitialized value in pack at C:/perl/lib/Time/Local.pm line 67.
Use of uninitialized value in pack at C:/perl/lib/Time/Local.pm line 67.
Use of uninitialized value in integer addition (+) at
C:/perl/lib/Time/Local.pm
line 68.
Use of uninitialized value in integer addition (+) at
C:/perl/lib/Time/Local.pm
line 69.
Use of uninitialized value in integer addition (+) at
C:/perl/lib/Time/Local.pm
line 67.
Use of uninitialized value in integer addition (+) at
C:/perl/lib/Time/Local.pm
line 76.
Use of uninitialized value in integer multiplication (*) at
C:/perl/lib/Time/Loc
al.pm line 76.
Use of uninitialized value in integer multiplication (*) at
C:/perl/lib/Time/Loc
al.pm line 76.
Use of uninitialized value in pack at C:/perl/lib/Time/Local.pm line 67.
Use of uninitialized value in pack at C:/perl/lib/Time/Local.pm line 67.
Use of uninitialized value in integer addition (+) at
C:/perl/lib/Time/Local.pm
line 67.
LP host (192.168.1.64) was not inside firewall UAE-ADSL
Waiting for name server result ...
Waiting for name server result ...
Sorting hosts (uses DNS, please connect)...
This may take a few minutes; increase debug to see activity
Warning: no DNS resolution for www.worldlingo.com
will only affect commStrat 2 - continuing
Checking all layer 0 hosts for connectivity...
LP: couldn't connect to 17 proxies
Don't panic, I can probably work ok without them
LocalProxy is offering services on the following ports:
10076:non-censoring HTTPS proxy
10078:HTTP zapped advertisement proxy
10079:proxy autoconfiguration
10080:non-censoring HTTP proxy - standard
10081:localProxy control
10082:anonymous, non-censoring HTTP proxy
10084:News CONNECT capable HTTP proxy
10119:Usenet news - ccnews
For web browser proxy service, please configure your web browser
http proxy entry to localhost:10080 and the
https proxy entry to localhost:10076 now
Only accepting connections from 127.0.0.1, 192.168.1.64
10080.2.0.-: access denied or failed, l0=164.67.194.225:3127: HTTP/1.0 400
10080.2.3.-: access denied or failed, l0=169.229.50.10:3127: You are trying
to u
se a node of the CoDeeN CDN Network
10080.2.5.-: access denied or failed, l0=142.103.2.1:3127: HTTP/1.0 400
10080.2.6.-: access denied or failed, l0=216.126.204.21:8888: HTTP/1.0 403
10084.1.2.17: unexpected response code in CONNECT (503) (l0:
213.42.2.25:8080 l1
: 210.179.237.253:8080)
10080.0.9.-: access denied or failed, l0=129.170.214.192:3127: You are
trying to
use a node of the CoDeeN CDN Network
10119.1.3.0: unexpected response code in CONNECT (503) (l0: 213.42.2.25:8080
l1:
ccnews.thu.edu.tw:119)
10080.1.2.0: unexpected response code in CONNECT (503) (l0: 213.42.2.25:8080
l1:
217.57.56.180:8080)
10080.1.3.1: unexpected response code in CONNECT (503) (l0: 213.42.2.23:8080
l1:
200.35.96.37:3128)
Use of uninitialized value in quotemeta at localProxy2.pl line 5613.
10080.2.10.-: access denied or failed, l0=128.208.4.199:3127: HTTP/1.0 400
10080.2(e).11.-: access denied or failed, l0=128.220.247.28:3127: HTTP/1.0
400
10080.2(e).13.-: access denied or failed, l0=129.93.68.56:3127: HTTP/1.0 400
10080.0.17.-: access denied or failed, l0=66.119.34.46:8000: HTTP/1.1 403
10080.0.18.-: access denied or failed, l0=170.224.224.75:8000: HTTP/1.1 403
10080.0.19.-: access denied or failed, l0=170.224.224.76:8000: HTTP/1.1 403
10080.0.20.-: access denied or failed, l0=66.119.34.45:8000: HTTP/1.1 403
10080.2(a).17.-: access denied or failed, l0=129.170.214.192:3127: HTTP/1.0
400
LP: retrying allocate ...
LP: probably unable to provide abstraction for the 10080 service
no working layer 0, or no working network
10080.1.-.-: requeued allocate request ... queue size 1
LP: retrying allocate ...
LP: probably unable to provide abstraction for the 10080 service
no working layer 0, or no working network
10080.1.-.-: requeued allocate request ... queue size 1
LP: retrying allocate ...
LP: probably unable to provide abstraction for the 10080 service
no working layer 0, or no working network
10080.1.-.-: requeued allocate request ... queue size 1
Thank you Wayne
Regards
>From: wayne <wayne@xxxxxxxxxxxxx>
>Reply-To: nocensorship@xxxxxxxxxxxxx
>To: nocensorship@xxxxxxxxxxxxx
>Subject: [noCensorship] Re: Localproxy related questions
>Date: 29 May 2005 22:55:30 -0000
>
>White Knight wrote:
> > Hi Wayne.
> >
> > Please consider that some peopole are still intrested in learning but
>most
> > of them might not have enough knowledge.
>
>To me, that translates into 'some want to increase their knowledge, but
>most don't have enough to start increasing it'. Hmmm...
>
> > Please post what you need us to help you with and how to do it and I am
>sure
> > you will see some response.
>
>Dunno about that.
>I made lots of requests for info from KSA.
>What is really needed are the IP subnets used by each ISP there, and any
>new ports that are blocked. From that information, people (and localProxy)
>can produce lists of usable proxies for KSA users.
>
>My interest in localProxy has increased lately (look at the CVS version of
>the back end to see the new ideas), so I'll be around more.
>
> > For instance, I downloaded and installed the latest local proxy version.
>it
>
>Heh, the CVS version? Or do you mean the latest released version (years
>old, i think).
>IIRC, I had very little feedback from that last release, so now proxyTools
>has gone ahead without releases. CVS is up to date though.
>
> > was working very nicely at first but after about a month of use, it
>became
> > almost dead in U.A.E. (I don't know about other places).
>
>It's the proxies that die. The UAE censorship hasn't changed much.
>I've used the same database for many months though without needing to get
>new proxies into it.
>It might seem to die sooner for others, coz I use a build with *all* the
>proxies in it. That takes longer to build, but I do it to ensure I
>eventually test all the proxies in the database. You could try this too, by
>just changing the globals.xml at this line:
> <item key="maxNrHostsPerLayer">10</item>
>Make it 1000 to ensure you get them all.
>It takes LP a lot longer to learn much about each of the many proxies it
>has available at runtime then too, but if there's even one proxy that works
>well, it should start to use it quickly.
>
> > Recently I have been facing the following problems:
> >
> > 1- When Local proxy is started the front end always starts like this
> > This is local proxy GUI <the 'front end'>, version 4.284
> > Proxies found in environment: proxy1.emirates.net.ae:8080
> > I'm assuming this IP address is (IP address)
> > I'm assuming this IP address is (IP address)
> > Setting default config syria-scs-net
> >
> > * How can I set the default config to U.A.E. -ADSL?
>
>That default only determines what is highlighted in the configuration list
>when the GUI loads. Click on the one you really need.
>It thinks Syria is a likely default for you because they have rfc1918
>subnets 10.0.5/24 and 192.168.2/24 and your address must lie in one of
>those.
>I did it (in firewalls.xml) to make it simple for users there a long time
>ago.
>I'll remove it.
>
> > 2- A pop-up window comes up to say
> >
> > Your hosts.xml database is over 2 weeks old
> > OK to get a new one? The new data will be available only after the
>next
> > start of Localproxy
> >
> > * Even if you press yes before selecting UAE-ADSL and clicking on start
> > sevices, cliking on "Update
> > proxies"
> > in advanced mode, then stopping and restarting services, The same
>message
> > of "Your hosts.xml
> > database is over 2 weeks old....." will still come again the next
>time I
> > run Localproxy.
> >
> > My question here is: What is the proper way to update proxies?
>
>Heh, I set that to 2 weeks when I was updating hosts.zip more often than I
>do now. Sorry about that. I still update more often, but it doesn't get
>sent to SourceForge so frequently.
>I'll see if I can still live with 2 weeks.
>There were a couple of other issues too.
>After a Windows service pack upgrade, my code was sometimes getting an
>empty file. I think that's fixed now, but I had only one system it happened
>on to test.
>There was a rumor that the UAE blocked the URL the file was coming from.
>That turned out to be false (so far). Last time I checked, they were
>blocking the project main pages, but not the CVS areas.
>
>That leads me to your question about the 'proper' way to get this file.
>Any way will do. You can even get it using your web browser, if you like.
>The URL used is:
>http://cvs.sourceforge.net/viewcvs.py/*checkout*/proxytools/proxyTools/hosts.zip?rev=HEAD
>Other CVS files can be obtained the same way (though there were
>complications there too, with the .pl files, IIRC).
>
> > 3- In Localproxy "Back end", I am getting : LP host <IP address> was not
> > inside firewall UAE-ADSL
>
>Next time you see that, tell me what your address was. It probably means
>there are new subnets in use in the UAE that I don't recognize. It does
>have some ramifications, but nothing that should degrade LP's performance
>much.
>
> > And after sorting hosts I'm always getting: DNS name resolution
>failed
>
>The back end log will tell you what DNS it tried to use (bump debug up a
>bit, if necessary, to see it). You may have the old UAE defaults hidden
>away in your registry (if it's a Windows system). LP finds them and tries
>to use them - they no longer work.
>I would need to see the section of the log (at debug = 3) that shows this
>to see exactly what's happening.
>
> > * What is wrong in this case and How to corret it?
> >
> >
> > Thanks and Regards
> >
> > White Knight
>
>Regards,
>wayne
>
>===8>============== noCensorship community ===============
>List's webpage: //www.freelists.org/webpage/nocensorship
>List's archive: //www.freelists.org/archives/nocensorship
>To unsubscribe: nocensorship-request@xxxxxxxxxxxxx with 'unsubscribe' in
>the SUBJECT field.
>Moderator's email: nocensorship-moderators@xxxxxxxxxxxxx
>===8>============== noCensorship community ===============
>
>
===8>============== noCensorship community ===============
List's webpage: //www.freelists.org/webpage/nocensorship
List's archive: //www.freelists.org/archives/nocensorship
To unsubscribe: nocensorship-request@xxxxxxxxxxxxx with 'unsubscribe' in the
SUBJECT field.
Moderator's email: nocensorship-moderators@xxxxxxxxxxxxx
===8>============== noCensorship community ===============
Other related posts:
