[nas-2000] Re: nzbget on nas2000/Tinky

  • From: "Jon Harris" <jon.c.harris@xxxxxxx>
  • To: <nas-2000@xxxxxxxxxxxxx>
  • Date: Sat, 24 May 2008 12:17:28 +0100

Yes, file system is ext3.  I've had some problems unpacking via a linux
laptop too (connected via usb).  Ideally I would like someone who already
has the build environment set up who could possibly try and compile this for
me, anyone?  please?

-----Original Message-----
From: nas-2000-bounce@xxxxxxxxxxxxx [mailto:nas-2000-bounce@xxxxxxxxxxxxx]
On Behalf Of Oliver Brinzing
Sent: 22 May 2008 08:32
To: nas-2000@xxxxxxxxxxxxx
Subject: [nas-2000] Re: nzbget on nas2000/Tinky

Hi Jon,

> I've tried this, and always get errors when untaring, then further errors
> when entering the buildroot.  Is there someone out there who could do this
for me?

mh, your file system is ext2/3 ?

 > Note: Unpacking the "stage3-armv4l-2005.1.tar.bz2" seems not to be
possible on the NAS.
 > I used a Live Linux CD with the NAS connected via USB.

did you try it this way ?

the build env size is unpacked about 530 mb ... so it will be difficult to
upload unpacked

hint: there is a forum at: http://nas2000.homeunix.com/



GnuPG key 0xCFD04A45: 8822 057F 4956 46D3 352C 1A06 4E2C AB40 CFD0 4A45

Other related posts: