[nas-2000] Re: Serial cable connection
- From: philipp Wehrheim <flipstar@xxxxxxx>
- To: nas-2000@xxxxxxxxxxxxx
- Date: Sat, 11 Aug 2007 18:55:25 +0200
Dennis Suchomsky wrote:
> Am Samstag, den 11.08.2007, 18:33 +0200 schrieb philipp Wehrheim:
>> Dennis Suchomsky wrote:
>>> Am Samstag, den 11.08.2007, 18:12 +0200 schrieb philipp Wehrheim:
>>>> Dennis Suchomsky wrote:
>>>>> OK one more thing....
>>>>> I can't send Output therefore i can't interupt the Boot progress.
>>>> do you want to save the hole output of the bootprocess?
>>>> you can enable minicom-logging and then simply scroll back to the
>>>> relevant parts
>>>>
>>> No sorry the Problem is that when I hit ctrl+C the NAS doesn't recieve
>>> the command.
>> you want to send CRTL+c to the bootloader?
>>
>> The rc-scripts starts when
>>
>> Mounting proc filesystem...
>>
>> is printed so after that point you should be able to press/send CRTL+c
> Yes but Im not. I Just tried to send the command from a file but this
> doesn't work either.
how can you send the signal from a file I dont really get what you are
trying to do?
>
>>>>> Sorry for bothering you so often but I promise Im going to write a Howto
>>>>> for the Wiki out of this ;)
>>>>> bye
>>>>> Dennis
>>>>>
>>>>>
>>>>>
>>>
>
>
Other related posts: