Good Mornin' everybody !Here are mine. they are very poor and i'm still investigating to find some answers....
Firmware: tinky-2_3_2-mu-02.2.tgz <http://www.nas-2000.org/download/tinky-2_3_2_mu_02/tinky-2_3_2-mu-02.2.tgz>
FTP:
Up: 1.5MB/S
Down: 1.8MB/S (==> 2.3MB/S with initial proftpd.conf file)
SMB:
Up: 1.5MB/S
Down: 1.8MB/S
File System:
Ext3 (400GB)
Drive test results:
root@NASDRIVE:~ # hdparm -tT /dev/hda1
/dev/hda1:
Timing buffer-cache reads: 124 MB in 2.04 seconds = 60.78 MB/sec
Timing buffered disk reads: 26 MB in 3.00 seconds = 8.67 MB/sec
Computer OS:
XP, same results with ubuntu live cd
Network:
NASBOX / LINKSYS WRT54G / ETHERNET
philipp Wehrheim a écrit :
Hi everybody, here is my proftpd bechmark: I used a 200M file created with dd if=/dev/zero of=./200M_file bs=1M count=200 When I did these test samba, nfs and well yes proftd where running. for tinky-2.3.2-mu-02.2 I get this results: upload time ncftpput -u admin -p admin 192.168.10.100 . ./200M_file ./200M_file: 200.00 MB 2.83 MB/s real 1m11.035s user 0m0.056s sys 0m1.140s download time ncftpget -u admin -p admin 192.168.10.100 . ./200M_file 200M_file: 200.00 MB 5.83 MB/s real 0m34.539s user 0m0.400s sys 0m4.956s for raidsonic fw 2_3_2-IB-2 upload time ncftpput -u admin -p admin 192.168.10.99 . ./200M_file ./200M_file: 200.00 MB 5.65 MB/s real 0m35.999s user 0m0.072s sys 0m0.984s download time ncftpget -u admin -p admin 192.168.10.99 . ./200M_file 200M_file: 200.00 MB 4.23 MB/s real 0m47.516s user 0m0.456s sys 0m4.844s So I think Tinky is doing quite well when it comes to download but is very slow with uploads. Running proftd -V on the tinky fw Features: + Autoshadow support + Controls support + curses support - Developer support - DSO support - IPv6 support + Largefile support + ncurses support - POSIX ACL support + Shadow file support + Sendfile support Tunable Options: PR_TUNABLE_BUFFER_SIZE = 1024 PR_TUNABLE_GLOBBING_MAX = 8 PR_TUNABLE_HASH_TABLE_SIZE = 40 PR_TUNABLE_NEW_POOL_SIZE = 512 PR_TUNABLE_RCVBUFSZ = 87380 PR_TUNABLE_SCOREBOARD_BUFFER_SIZE = 80 PR_TUNABLE_SCOREBOARD_SCRUB_TIMER = 30 PR_TUNABLE_SELECT_TIMEOUT = 30 PR_TUNABLE_SNDBUFSZ = 16384 PR_TUNABLE_TIMEOUTIDENT = 10 PR_TUNABLE_TIMEOUTIDLE = 600 PR_TUNABLE_TIMEOUTLINGER = 180 PR_TUNABLE_TIMEOUTLOGIN = 300 PR_TUNABLE_TIMEOUTNOXFER = 300 PR_TUNABLE_TIMEOUTSTALLED = 3600 PR_TUNABLE_XFER_BUFFER_SIZE = 16384 PR_TUNABLE_XFER_SCOREBOARD_UPDATES = 10 and running proftd -V on 2_3_2-IB-2 Features: + Autoshadow support - Controls support + curses support - Developer support - DSO support - IPv6 support + Largefile support + ncurses support - POSIX ACL support + Shadow file support + Sendfile support Tunable Options: PR_TUNABLE_BUFFER_SIZE = 1024 PR_TUNABLE_GLOBBING_MAX = 8 PR_TUNABLE_HASH_TABLE_SIZE = 40 PR_TUNABLE_NEW_POOL_SIZE = 512 PR_TUNABLE_RCVBUFSZ = 8192 PR_TUNABLE_SCOREBOARD_BUFFER_SIZE = 80 PR_TUNABLE_SCOREBOARD_SCRUB_TIMER = 30 PR_TUNABLE_SELECT_TIMEOUT = 30 PR_TUNABLE_SNDBUFSZ = 8192 PR_TUNABLE_TIMEOUTIDENT = 10 PR_TUNABLE_TIMEOUTIDLE = 600 PR_TUNABLE_TIMEOUTLINGER = 180 PR_TUNABLE_TIMEOUTLOGIN = 300 PR_TUNABLE_TIMEOUTNOXFER = 300 PR_TUNABLE_TIMEOUTSTALLED = 3600 PR_TUNABLE_XFER_BUFFER_SIZE = 1024 PR_TUNABLE_XFER_SCOREBOARD_UPDATES = 10 Further more the tinky proftpd has support (modules) for dyndns, shaper and ctrls (see proftpd -vv) which the 2_3_2-IB-2 has not. I'll change the RCVBUFSZ to the size of SNDBUFSZ and we should discuss which modules are really needed for the ftp. -- regards flip Aurel schrieb:Can you send us your proftpd.conf file ! Indeed with mine, transfers are limited to 1.5M/s ! Selon Julius Loman <lomo@xxxxxxxxxxx>:On Fri, May 11, 2007 at 01:37:46PM +0200, Julius Loman <lomo@xxxxxxxxxxx> wrote:On Fri, May 11, 2007 at 12:13:05PM +0200, Aurel <massman@xxxxxxx> wrote:Can you give us the FTP speed levels as well for information?ftp is ok (but was not working out-of-box, beacuse of unknown directive in configuration file) measured on 100MB file with wget: 6.92M/sfurther testing gives me slightly better speeds when i mount the share on my linux laptop with cifs instead of smbfs (about 2.9 MB/s) when accessing from windows, it is the same as with smbfs (1.7MB/s) could you guys post your smb.conf you have on your nas ? i haven't touched mine yet, but i want a comparision - just to be sureSelon Julius Loman <lomo@xxxxxxxxxxx>:Hi everybody I'm using tinky-2_3_2-mu-02.2 and I've got quite poor throughtput via SMB, only about 1.4MB/sec upload to NAS and about 1.9MB/sec download. When doing download/upload operations - top shows me that smbd iseating~95% cpu and i receive many software interrups (si value in top is ~34%). Do you have such poor throughtput as well or do I have some shitty piece of hardware ? (Maybe slower CPU than you ?) I expected a lotmore.FYI - dma is turned on and I didn't measure performance with original firmware, because I've overwritten it with tinky in the same hour asthebox arrived. Here is my cpuinfo: Processor : FA52Xid(wb) rev 1 (v4l) BogoMIPS : 69.83 Features : swp half thumb CPU implementer : 0x66 CPU architecture: 4 CPU variant : 0x0 CPU part : 0x526 CPU revision : 1 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format B Cache format : Harvard I size : 8192 I assoc : 2 I line length : 16 I sets : 256 D size : 4096 D assoc : 2 D line length : 16 D sets : 128 Hardware : Sword sl2312 Revision : 0000 Serial : 0000000000000000 -- [ Julius Loman ][ lomo@xxxxxxxxxxx ][ http://lomo.kyberia.net ][icq:35732873]-- Aurel le bel homme-- [ Julius Loman ][ lomo@xxxxxxxxxxx ][ http://lomo.kyberia.net ][icq:35732873 ] -- [ Julius Loman ][ lomo@xxxxxxxxxxx ][ http://lomo.kyberia.net ][ icq:35732873 ]-- Aurel
