Hey JERKBALL JERKBALL schrieb: > Hi, > > got a big problem with my Nas2000. Flashed the Tinky Firmware on my new > Nas2000. > > Seems, that I wasn’t allowed to flash the Firm on that brand new Nas2000. > > Reaching Redboot was no problem. Flashed as said in the Readme. After > uploading went fine, I pressed Y and waited… > > Long time nothing happened, then telnet-window showed me, that it wrote > in specific memory banks or something like that…. > > Long, long list that suddenly stopped with an „a“ at the beginning of > the line (which seemed to stand for „a“dress) > > I waited some minutes, then the telnet window showed a message, that the > connection was terminated… > > „Weird“ I thought, ´cause in the Readme was written, that I would get > back tot he Redboot Menu for rebooting. > > I waited some more Minutes and than I couldn’t do anything than > switching oft he device… > > No there’s no Redboot answering on 192.168.2.71 anymore… :( > > I build myself a data cable out of an old black Siemens S45 data cable, > attached 3,3V to Pin 4 and started over Hyperterm > > I used 19200 8N1 as said… (hardware control switched off), but all I get > during switching on the device is „N“ > > Switching off gives me a „FFN“ right behind the „N“ from starting the > device… > > I tested 9600 baud, but there I got even less… > > I ordered the Serial Cable from Icy Box, but I got no answer and I > belive my Serial Number is too new… > > What can I do? Help me :) if the bootloader is broken there is not much you can do ... The only thing that can help is a J-TAG adapter to rewrite the entire Flash. -- flip