I configured my router to: 192.168.2.X DHCP and connected to bootloader successful. But when i pressed ctrl+c my windows cmd just writed small heart, now ill try it in unix :) On 9/30/07, JERKBALL <JERKBALL@xxxxxxx> wrote: > > During the startup of the Redboot Bootloader, your NAS has the IP > 192.168.2.71. It's staticly written in your Bootloader. > > > > Assign a 192.168.2.X IP-Address to your NIC and start the telnet command > while you press the powerbutton on your NAS. > > > > Good luck! > > > > JERKBALL > > > > *Von:* nas-2000-bounce@xxxxxxxxxxxxx [mailto:nas-2000-bounce@xxxxxxxxxxxxx] > *Im Auftrag von *Default User > *Gesendet:* Sonntag, 30. September 2007 13:27 > *An:* nas-2000@xxxxxxxxxxxxx > *Betreff:* [nas-2000] Re: NAS-2000 Bootloader problem? > > > > Hello Tom, > > When i tried use flashstart with router and dynamic nas ip, i receive > error that port 9000 are closed, > When i tried flash start directly PC->NAS (without router), program did > not reach nas :/ > > So i want to know do i need serial cable to upgrade firmware to tinky? >