Moin, JERKBALL schrieb: > Hi Flipstar, > > I'm nearly finished building the JTAG-Cable.. Just got the 4,7KOhm resistors > (none at home) > > But I still can't get it, how to write the Flash... For WRT54, you get nice > prog's, where you just load the binary firmware file and write it over LPT on > the Router... Are there similar prog's for ARM structure available? > > Hope, somebody can help me :) really cool! not sure if this helps: http://openwince.sourceforge.net/jtag/ http://sourceware.org/redboot/ http://www.mikrocontroller.net/articles/JTAG#ARM_JTAG sorry -- flip > > Greets > > JERKBALL > > -----Ursprüngliche Nachricht----- > Von: nas-2000-bounce@xxxxxxxxxxxxx [mailto:nas-2000-bounce@xxxxxxxxxxxxx] Im > Auftrag von flipstar@xxxxxxx > Gesendet: Freitag, 21. September 2007 19:33 > An: nas-2000@xxxxxxxxxxxxx > Betreff: [nas-2000] Re: AW: Re: Bootloader gone. Serial-Cable weird text > > > > JERKBALL schrieb: >> Hi Flipstar, >> >> thanks a lot for your answer... >> >> JTAG would be great. Got a JTAG for WRT54GS here and I'm able to bild some >> things without any problem... >> >> Wanted to go over to JTAG directly, but I didn't find any >> documentation about the jtag connector in the NAS2000 :( >> >> Help would be very appreciated. >> >> Greets, >> >> JERKBALL >> >> -----Ursprüngliche Nachricht----- >> Von: nas-2000-bounce@xxxxxxxxxxxxx >> [mailto:nas-2000-bounce@xxxxxxxxxxxxx] Im Auftrag von flipstar@xxxxxxx >> Gesendet: Freitag, 21. September 2007 18:29 >> An: nas-2000@xxxxxxxxxxxxx >> Betreff: [nas-2000] Re: Bootloader gone. Serial-Cable weird text >> >> Hey JERKBALL >> >> JERKBALL schrieb: >>> Hi, >>> >>> got a big problem with my Nas2000. Flashed the Tinky Firmware on my >>> new Nas2000. >>> >>> Seems, that I wasn’t allowed to flash the Firm on that brand new Nas2000. >>> >>> Reaching Redboot was no problem. Flashed as said in the Readme. After >>> uploading went fine, I pressed Y and waited… >>> >>> Long time nothing happened, then telnet-window showed me, that it >>> wrote in specific memory banks or something like that…. >>> >>> Long, long list that suddenly stopped with an „a“ at the beginning of >>> the line (which seemed to stand for „a“dress) >>> >>> I waited some minutes, then the telnet window showed a message, that >>> the connection was terminated… >>> >>> „Weird“ I thought, ´cause in the Readme was written, that I would get >>> back tot he Redboot Menu for rebooting. >>> >>> I waited some more Minutes and than I couldn’t do anything than >>> switching oft he device… >>> >>> No there’s no Redboot answering on 192.168.2.71 anymore… :( >>> >>> I build myself a data cable out of an old black Siemens S45 data >>> cable, attached 3,3V to Pin 4 and started over Hyperterm >>> >>> I used 19200 8N1 as said… (hardware control switched off), but all I >>> get during switching on the device is „N“ >>> >>> Switching off gives me a „FFN“ right behind the „N“ from starting the >>> device… >>> >>> I tested 9600 baud, but there I got even less… >>> >>> I ordered the Serial Cable from Icy Box, but I got no answer and I >>> belive my Serial Number is too new… >>> >>> What can I do? Help me :) >> if the bootloader is broken there is not much you can do ... >> The only thing that can help is a J-TAG adapter to rewrite the entire Flash. > > Please see the file attached. > Don't ask how it works I have no idea about things like that. > > If it does anything usefull for you please write some notes / a howto in the > wiki!!! > > -- > flip > > > > > __________ NOD32 2544 (20070921) Information __________ > > Diese E-Mail wurde vom NOD32 antivirus system geprft http://www.nod32.com > >