Hi Joel! In the master branch, I still get the problem with the hidden track. add monitor;stereo;source 5 [all OK, only three tracks displayed from the reconfiguration] show [four tracks displayed and the same error about attempting to select chain 4] remove_track [works, but no confirmation is required. Because no wav/effects are attached?]Attahced you will also find the output of make test again, since there are still cleanup errors with latency.t and there's a file not found. Start from the end and you'll encounter them very quickly.
OK, uni and then back to the problem at hand. Testingly yours Julien =-=-=-=-=-=-=-=-=-=-=-=- Such Is Life: Very Intensely Adorable; Free And Jubilating Amazement Revels, Dancing On - FLOWERS! ====== Find my music at ====== http://juliencoder.de/nama/music.html ..................................... "If you live to be 100, I hope I live to be 100 minus 1 day, so I never have to live without you." (Winnie the Pooh)
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/01_symbols.t .. ok # TESTING t/02_assign.t # testing for class :: Log4perl: Seems like no initialization happened. Forgot to call init()? # Serializing, storing and recalling data # testing for class main:: # Serializing, storing and recalling data # testing for class main # Serializing, storing and recalling data # scalar array: 4 scalar hash: 1/8 t/02_assign.t ... ok # TESTING t/03_wav.t t/03_wav.t ...... ok # TESTING t/04_object.t # testing trivial class Apple t/04_object.t ... ok # TESTING t/11_mark.t t/11_mark.t ..... ok # TESTING t/12_nama.t # working directory: /root/build/second/nama didn't find a match for autosave_interval in %devices $alsa_playback_device $alsa_capture_device $soundcard_channels %abbreviations $mix_to_disk_format $raw_to_disk_format $cache_to_disk_format $mixer_out_format $ecasound_tcp_port $ecasound_globals_general $ecasound_globals_realtime $ecasound_globals_nonrealtime $ecasound_buffersize_realtime $ecasound_buffersize_nonrealtime $project_root $use_group_numbering $press_space_to_start_transport $execute_on_project_load $initial_user_mode $midish_enable $quietly_remove_tracks $use_jack_plumbing $jack_seek_delay $use_monitor_version_for_mixdown $volume_control_operator $eager_mode $serialize_formats $use_git $beep_command $eq $low_pass $mid_pass $high_pass $compressor $spatialiser $limiter didn't find a match for sample_rate in %devices $alsa_playback_device $alsa_capture_device $soundcard_channels %abbreviations $mix_to_disk_format $raw_to_disk_format $cache_to_disk_format $mixer_out_format $ecasound_tcp_port $ecasound_globals_general $ecasound_globals_realtime $ecasound_globals_nonrealtime $ecasound_buffersize_realtime $ecasound_buffersize_nonrealtime $project_root $use_group_numbering $press_space_to_start_transport $execute_on_project_load $initial_user_mode $midish_enable $quietly_remove_tracks $use_jack_plumbing $jack_seek_delay $use_monitor_version_for_mixdown $volume_control_operator $eager_mode $serialize_formats $use_git $beep_command $eq $low_pass $mid_pass $high_pass $compressor $spatialiser $limiter : file not found at /root/build/second/nama/blib/lib/Audio/Nama/Persistence.pm line 874 Audio::Nama::restore_effect_chains() called at /root/build/second/nama/blib/lib/Audio/Nama/Initializations.pm line 360 Audio::Nama::initialize_interfaces() called at t/12_nama.t line 55 Useless use of not in void context at (eval 1190) line 45312, <DATA> line 29435. # Check representative variable from default .namarc # IO.pm unit test 1 # IO.pm unit test 2 # IO.pm unit test 3 # IO.pm unit test 4 # IO.pm unit test 5 # IO.pm unit test 6 # IO.pm unit test 7 # IO.pm unit test 8 # IO.pm unit test 9 # IO.pm unit test 10 # IO.pm unit test 11 # IO.pm unit test 12 # IO.pm unit test 13 # IO.pm unit test 14 # IO.pm unit test 15 # IO.pm unit test 16 (L 183) c-select 3: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 3: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 3: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 3: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 3: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 3: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 3: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 3: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 3: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 3: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 1: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 1: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 2: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 2: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 1: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 1: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 4: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 5: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 6: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 7: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 8: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 4: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 5: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 6: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 7: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 8: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 1: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 1: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 3: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 3: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 (L 183) c-select 3: attempted to select non-existing Ecasound chain at /root/build/second/nama/blib/lib/Audio/Nama/Engine.pm line 183 # Edit mode playat and region endpoints adjustment Couldn't chdir /root/build/second/nama/test/: No such file or directory at /usr/local/share/perl/5.10.1/File/Find/Rule.pm line 594 (in cleanup) DESTROY: illegal method call at t/12_nama.t line 0 t/12_nama.t ..... ok # TESTING t/13_io.t t/13_io.t ....... ok # TESTING t/14_latency.t # working directory: /root/build/second/nama didn't find a match for autosave_interval in %devices $alsa_playback_device $alsa_capture_device $soundcard_channels %abbreviations $mix_to_disk_format $raw_to_disk_format $cache_to_disk_format $mixer_out_format $ecasound_tcp_port $ecasound_globals_general $ecasound_globals_realtime $ecasound_globals_nonrealtime $ecasound_buffersize_realtime $ecasound_buffersize_nonrealtime $project_root $use_group_numbering $press_space_to_start_transport $execute_on_project_load $initial_user_mode $midish_enable $quietly_remove_tracks $use_jack_plumbing $jack_seek_delay $use_monitor_version_for_mixdown $volume_control_operator $eager_mode $serialize_formats $use_git $beep_command $eq $low_pass $mid_pass $high_pass $compressor $spatialiser $limiter didn't find a match for sample_rate in %devices $alsa_playback_device $alsa_capture_device $soundcard_channels %abbreviations $mix_to_disk_format $raw_to_disk_format $cache_to_disk_format $mixer_out_format $ecasound_tcp_port $ecasound_globals_general $ecasound_globals_realtime $ecasound_globals_nonrealtime $ecasound_buffersize_realtime $ecasound_buffersize_nonrealtime $project_root $use_group_numbering $press_space_to_start_transport $execute_on_project_load $initial_user_mode $midish_enable $quietly_remove_tracks $use_jack_plumbing $jack_seek_delay $use_monitor_version_for_mixdown $volume_control_operator $eager_mode $serialize_formats $use_git $beep_command $eq $low_pass $mid_pass $high_pass $compressor $spatialiser $limiter : file not found at /root/build/second/nama/blib/lib/Audio/Nama/Persistence.pm line 874 Audio::Nama::restore_effect_chains() called at /root/build/second/nama/blib/lib/Audio/Nama/Initializations.pm line 360 Audio::Nama::initialize_interfaces() called at t/14_latency.t line 55 Useless use of not in void context at (eval 1190) line 45312, <DATA> line 21025. # Check representative variable from default .namarc Couldn't chdir /root/build/second/nama/untitled/: No such file or directory at /usr/local/share/perl/5.10.1/File/Find/Rule.pm line 594 (in cleanup) DESTROY: illegal method call at t/14_latency.t line 0 t/14_latency.t .. ok All tests successful. Files=8, Tests=146, 21 wallclock secs ( 0.17 usr 0.03 sys + 16.33 cusr 2.36 csys = 18.89 CPU) Result: PASS