[mswindowsxp] Re: SP1 Warning? Help?

  • From: "Chris McEvoy" <chris@xxxxxxxxxxxxxxxxx>
  • To: <mswindowsxp@xxxxxxxxxxxxx>
  • Date: Wed, 11 Sep 2002 11:59:55 +0100



> -----Original Message-----
> From: Mark Mucher [mailto:mm@xxxxxx]=20
> Sent: 11 September 2002 01:05
> To: mswindowsxp@xxxxxxxxxxxxx
> Subject: [mswindowsxp] Re: SP1 Warning? Help?
>=20
>=20
>=20
> AMAZING!  It's incredible!
>=20
> Just removing SP1 made the .NET server come back!
>=20
> I searched the KB and didn't find a work-around, but I=20
> haven't given up=20
> yet - Thanks everyone!
>=20
> Mark
>=20
>=20
> Charles E. James wrote:
>=20
> >I can't remember the article or the exact specs but the article=20
> >indicated that there are problems when applying SP's with a=20
> dual boot=20
> >config.
> >
> >Go to MS knowledge base and pull up the page on this issue for the=20
> >workaround, etc.
> >
> >Also, when installing the SP did you choose the choice for=20
> reverting to=20
> >the previous config. This, I believe, is the only way to get back to=20
> >normal until you get the workaround. The workaround will=20
> require it to=20
> >be rolled back anyway...
> >
> >
> >Mark Mucher <mm@xxxxxx> wrote:
> >
> > =20
> >
> >>FWIW, the first time I (dual) booted to .NET Server after I applied=20
> >>SP1,
> >>it wants to reboot - in normal mode, in safe mode, in previous good=20
> >>config, etc!
> >>
> >>Any suggestions?
> >>
> >>Thanks,
> >>
> >>Mark
> >>   =20
> >>
> > =20
> >
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
> To Unsubscribe, set digest or vacation
> mode or view archives use the below link.
>=20
http://thethin.net/winxplist.cfm






==================================
To Unsubscribe, set digest or vacation
mode or view archives use the below link.

http://thethin.net/winxplist.cfm

Other related posts: