[mswindowsxp] Re: Netware and XP Pro (WAS Re: Protect)
- From: "Amer Karim" <amerk@xxxxxxxxxxxxxxxx>
- To: <mswindowsxp@xxxxxxxxxxxxx>
- Date: Wed, 3 Mar 2004 17:36:45 -0800
First - Can you find the server via IP address?
In the meantime, check the following:
XP Pro Client services and protocols -=20
Client services for Netware
NWLink IPX/SPX/NetBIOS compatible transport
Also, check that the fame type on the client matches the frame type on
the server - you may want to set this manually instead of leaving it on
'Auto Detect'.
Regards,
Amer Karim
Nautilis Information Systems
e-mail: amerk@xxxxxxxxxxxxxxxx
=20
-----Original Message-----
From: mswindowsxp-bounce@xxxxxxxxxxxxx
[mailto:mswindowsxp-bounce@xxxxxxxxxxxxx] On Behalf Of Bill Beckett
Sent: March 3, 2004 5:15 PM
To: mswindowsxp@xxxxxxxxxxxxx
Subject: [mswindowsxp] Re: Netware and XP Pro (WAS Re: Protect)
4.11
-----Original Message-----
From: Amer Karim [mailto:amerk@xxxxxxxxxxxxxxxx]=20
Sent: Wednesday March 03, 2004 6:20 PM
To: mswindowsxp@xxxxxxxxxxxxx
Subject: [mswindowsxp] Re: Netware and XP Pro (WAS Re: Protect)
Also - which version of Netware?
Can you find the server if you browse by IP? If you can, does it then
accept your Netware logon credentials?
Regards,
Amer Karim
Nautilis Information Systems
e-mail: amerk@xxxxxxxxxxxxxxxx
=3D20
=3D20
-----Original Message-----
From: mswindowsxp-bounce@xxxxxxxxxxxxx
[mailto:mswindowsxp-bounce@xxxxxxxxxxxxx] On Behalf Of Amer Karim
Sent: March 3, 2004 3:15 PM
To: mswindowsxp@xxxxxxxxxxxxx
Subject: [mswindowsxp] Re: Netware and XP Pro (WAS Re: Protect)
Which Netware client are you using - the MS one or the Novell Client32
one?
(PS - please change the subject if you post a new question)
Regards,
Amer Karim
Nautilis Information Systems
e-mail: amerk@xxxxxxxxxxxxxxxx
=3D3D20
=3D3D20
-----Original Message-----
From: mswindowsxp-bounce@xxxxxxxxxxxxx
[mailto:mswindowsxp-bounce@xxxxxxxxxxxxx] On Behalf Of Bill Beckett
Sent: March 3, 2004 2:46 PM
To: mswindowsxp@xxxxxxxxxxxxx
Subject: [mswindowsxp] Re: Protect
Thanks. Another XP question...this one Pro.=3D3D20
I have a Pro machine that is in a workgroup, not part of a domain. There
is
also a Netware server on the network which I would like to access. I
have
installed IP, IPX and client services for netware. However, when I try
to
browse, it just comes back with the message ... "network path not
found".=3D3D20
Can't browse, no option to login to the netware box. Any ideas?
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=
3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D
=3D3D=3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D
To Unsubscribe, set digest or vacation
mode or view archives use the below link.
http://thethin.net/winxplist.cfm
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
To Unsubscribe, set digest or vacation
mode or view archives use the below link.
http://thethin.net/winxplist.cfm
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
To Unsubscribe, set digest or vacation
mode or view archives use the below link.
http://thethin.net/winxplist.cfm
==================================
To Unsubscribe, set digest or vacation
mode or view archives use the below link.
http://thethin.net/winxplist.cfm
Other related posts:
