Rob,Thanks for your reply. Wel, it works as you said. I guess I was using the up and/or down arrow key before the whole process was completed. However, it is slower than it was before, I'm sure of that. The slowness isn't related to the length of the register, at least notwith a register holding some 500 plus transactions versus one with a few dozen. I just wait about three seconds for the process to finish but I'm sure it was a bit faster before.
Thanks again. Steve----- Original Message ----- From: "ROB MEREDITH" <rmeredith@xxxxxxx>
To: <moneytalks@xxxxxxxxxxxxx> Sent: Monday, February 26, 2007 11:59 AMSubject: [moneytalks] Re: Have I found a bug, or was it supposed to bethis way?
Steve: This hasn't changed. Version 1.2 is virtually version 1.1.0.363 Beta. I would not expect any performance differences. Perhaps you are not doing one of the following: 1. Waiting long enough after typing the item to be ored in. 2. Pressing Enter after typing the part to be ored in. After hitting \ or |, you can begin typing the data to be ored with the current data. After about three seconds of typing nothing, the program ors the data and shows the results. You can type Enter to avoid the delay. Rob Meredithsteveziel@xxxxxxxxxxxxx 02/26/07 10:39AM >>>Rob and all, I cannot use the "or" opporator to restrict multiple choices in the payee/payer field, the amount field, or the item field. I thought I used to be able to do that. Example: I have AT&T and ComEd for some of my utilities. I thought I used to be able to type in the payee/payer field the following: at|com And would get both listed. Now I only get the first one I type, in this case at&t. If anybody is using the beta version, having not yet upgraded to 1.2, can you please verify this. If you don't use this feature and would like further info to use it, please do write before doing the upgrade. Perhaps I can help. Also, can folks using 1.2 also verify to see if you are getting different results from me? It would be most appreciated. Rob, has this changed or is it a feature. If a feature, it surely should be available across all if not most columns? If it's a feature, as I find it operating, it certainly is no big deal now. Steve -- No virus found in this incoming message. Checked by AVG Free Edition.Version: 7.5.446 / Virus Database: 268.18.4/702 - Release Date: 2/25/2007 3:16 PM