I certainly agree. When I press E, the only thing that happens is I am put back into the application. I don't even get the Export dialog. Dave ----- Original Message ----- From: "Leonard Salinas" <okiespirit@xxxxxxxxxxxxx> To: <moneytalks@xxxxxxxxxxxxx> Sent: Monday, March 07, 2005 15:13 Subject: [moneytalks] Re: Exiting > hmmm, it is E, but the export command has that letter assigned to > it so if I press alt+f then e, it brings up the export file dialog. > I think it would be good to change the e for exit to x. > > > on Monday 3/7/2005 02:00 PM, Dave Speck said: > > >I understand that. I am referring to the Exit command in the File > >menu > >which would be used in place of the Alt+F4 keystroke. Pressing > >the letter > >"E" for that option does not work for exiting the program. > > > >Dave > > > > > > > >----- Original Message ----- > >From: "Leonard Salinas" <okiespirit@xxxxxxxxxxxxx> > >To: <moneytalks@xxxxxxxxxxxxx> > >Sent: Monday, March 07, 2005 14:52 > >Subject: [moneytalks] Re: Exiting > > > > > > > o.k. there's the close option in the files pull down that says > > > ctrl+f4 for the hotkey, that only closes your .mtf file. the exit > > > command from the files pull down menu is equivalent to the alt+f4 > > > command. > > > > > > > > > on Monday 3/7/2005 01:34 PM, Dave Speck said: > > > > > > >Hello, > > > >I noticed that when I am ready to exit the MT program, pressing > > > >the hotkey "E" for Exit takes me out of the File menu but does not > > > >work. I have to press Alt+F4, or go back to the File menu and > > > >press Enter on the Exit option. Is this only happening to me? > > > > > > > >Thanks > > > > > > > >Dave > > > > > > > >